Kaba E-PLEX 2000 Series Installation Instructions Manual page 18

1. Reversible ASM (continued)
c. Push in the latch bolt (L) to the middle of its stroke, and hold it there.
(Continue Step 1 and 2)
1
Use a small screwdriver
to lift unlock mechanism.
Hold the latch (L) inside the mortise, and insert the tailpiece retaining
tool (S, part #027-510382 or #041-513342 available separately) so that
the tailpiece (T) will not drop inside the mortise case. Hold the tool and
the latch with one hand, and slide up the tailpiece using a small screwdriver.
S
(part #027-510382)
Continue to hold tool (S). Release the latch bolt (L) and keep the anti-
friction latch (F) toward the flat side of the latch bolt so that the bolt
extends fully.
S
18
Lock Position
2
L
Push in the latchbolt to the
end of the stroke, and hold
it there.
T
L
L
F
Unlock Position
L