Headlamp High/Low-Beam Changer; Flash-To-Pass - Pontiac Montana SV6 2007 Owner's Manual

If you have a trailer towing option with added
wiring for the trailer lamps, the signal indicator will
flash at a normal rate even if a turn signal bulb
is burned out. Check the front and rear turn signal
lamps regularly to make sure they are working.
Turn Signal On Chime
If either turn signal is left on for more than 3/4 mile
(1.2 km), a chime will sound to let the driver
know to turn it off. If you need to leave the signal
on for more than 3/4 mile (1.2 km), turn off the
signal and then turn it back on.

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to
high beam, push the turn signal/multifunction lever
away from you.
To change the headlamps from high beam to
low beam, pull the turn signal/multifunction lever
toward you.

Flash-to-Pass

When the headlamps are off, pull the lever toward
you to momentarily turn on the high beams.
This will signal that you are going to pass.
When you release the lever, they will turn off.
When the high beams
are on, this light
will appear on the
instrument panel cluster.
181