License Plate Lamp; Replacement Bulbs - Pontiac Wave 2009 Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps.
2. Turn and pull the license plate lamp toward you
through the opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Push the bulb straight into the socket and turn
clockwise to reinstall.
6. Push and turn the license plate lamp away from
you through the opening.
7. Reinstall the two screws holding the license
plate lamp.

Replacement Bulbs

Exterior Lamp
Back-Up Lamps
Center High-Mounted Stoplamp
(CHMSL)
Front Parking/Turn Signal Lamps
Front Sidemarker Lamps
Headlamps
License Plate Lamp
Rear Sidemarker Lamps
Rear Turn Signal Lamps
Stoplamp/Taillamps
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
94535571
94535587
94535578
94535578
94535548
94535587
94535577
94535572
94535577
5-47