Table of Contents

Advertisement

2008 Pontiac Montana SV6 Owner Manual
Seats and Restraint Systems ........................... 1-1
Front Seats
............................................... 1-2
Rear Seats
............................................... 1-6
Safety Belts
............................................. 1-22
Child Restraints
....................................... 1-42
Airbag System
......................................... 1-65
Restraint System Check
Features and Controls ..................................... 2-1
Keys
........................................................ 2-3
Doors and Locks
...................................... 2-10
Windows
................................................. 2-24
Theft-Deterrent Systems
Starting and Operating Your Vehicle
Mirrors
.................................................... 2-43
Object Detection Systems
®
OnStar
System
...................................... 2-47
Universal Home Remote System
Storage Areas
......................................... 2-54
Instrument Panel ............................................. 3-1
Instrument Panel Overview
Climate Controls
...................................... 3-23
Warning Lights, Gages, and Indicators
Driver Information Center (DIC)
Audio System(s)
....................................... 3-78
............................ 1-80
............................ 2-27
........... 2-31
.......................... 2-44
................ 2-50
.......................... 3-4
........ 3-32
.................. 3-47
Driving Your Vehicle ....................................... 4-1
Your Driving, the Road, and Your Vehicle
Towing
................................................... 4-27
Service and Appearance Care .......................... 5-1
Service
..................................................... 5-3
Fuel
......................................................... 5-5
Checking Things Under the Hood
Headlamp Aiming
..................................... 5-41
Bulb Replacement
Windshield Wiper Blade Replacement
Tires
...................................................... 5-48
Appearance Care
..................................... 5-90
Vehicle Identification
Electrical System
...................................... 5-99
Capacities and Specifications
Maintenance Schedule ..................................... 6-1
Maintenance Schedule
Customer Assistance Information .................... 7-1
Customer Assistance and Information
Reporting Safety Defects
Vehicle Data Recording and Privacy
Index ................................................................ 1
M
............... 5-10
.................................... 5-42
......... 5-47
................................. 5-98
................... 5-105
................................ 6-2
........... 7-2
........................... 7-16
........... 7-19
..... 4-2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Montana SV6 2008 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pontiac Montana SV6 2008

  • Page 1 2008 Pontiac Montana SV6 Owner Manual Seats and Restraint Systems ......1-1 Driving Your Vehicle ........4-1 Front Seats Your Driving, the Road, and Your Vehicle ..........1-2 ..4-2 Rear Seats Towing ..........1-6 ........... 4-27 Safety Belts ..........1-22 Service and Appearance Care ......
  • Page 2: Using This Manual

    Detroit, MI 48207 1-800-551-4123 www.helminc.com GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the names MONTANA and Propriétaires Canadiens SV6 are registered trademarks of General Motors Corporation. On peut obtenir un exemplaire de ce guide en français auprès de concessionnaire ou à...
  • Page 3 Index We tell you what the hazard is and what to do to help avoid or reduce the hazard. Please read these cautions. If you do not, you or others could be hurt. A good place to quickly locate information about the vehicle is the Index in the back of the manual.
  • Page 4: Vehicle Symbols

    Vehicle Damage Warnings Vehicle Symbols You will also find notices in this manual. The vehicle has components and labels that use symbols instead of text. Symbols are shown along Notice: These mean there is something that could with the text describing the operation or information damage your vehicle.
  • Page 5: Table Of Contents

    Section 1 Seats and Restraint Systems Front Seats ............1-2 Where to Put the Restraint ......1-50 Manual Seats ..........1-2 Lower Anchors and Tethers for Power Seats ..........1-3 Children (LATCH) ........1-52 Heated Seats ..........1-3 Securing a Child Restraint in a Reclining Seatbacks ........1-4 Rear Seat Position ........1-59 Head Restraints ..........1-6 Securing a Child Restraint in the Right Front...
  • Page 6: Front Seats

    Front Seats CAUTION: Manual Seats You can lose control of the vehicle if you try to Use the lever located on adjust a manual driver’s seat while the vehicle the front of the seat to is moving. The sudden movement could startle adjust the seat forward or and confuse you, or make you push a pedal rearward.
  • Page 7: Power Seats

    Power Seats Heated Seats Your vehicle may have this feature. If it does, If the vehicle has power the heated seat buttons are located on the climate seats, the controls used to control panel. operate them are located This feature will heat the lower cushions of the driver’s on the outboard side of the and front passenger’s seats.
  • Page 8: Reclining Seatbacks

    Reclining Seatbacks Your seats have manual reclining seatbacks. The lever used to operate them is located on the outboard side of the seats. CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
  • Page 9 To return the seatback to an upright position, do the following: CAUTION: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright Sitting in a reclined position when your vehicle position. is in motion can be dangerous.
  • Page 10: Rear Seats

    Head Restraints Rear Seats Rear Seat Operation The rear seats in your vehicle have levers and straps used to adjust, remove, and reinstall the seats. By using the levers and straps in the correct order, you can easily remove the seats from the vehicle. If your vehicle has second row captain chairs with airbags, the seats cannot be removed.
  • Page 11 Fold and Tumble Feature 2. Fold the seatback flat on the seat. CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position.
  • Page 12 3. Slide the seat all the way back in this position. 2. Try to raise the seat to check that it is locked to the floor. 4. Release the rear set of 3. Pull the nylon strap, located on the rear right hand seat hooks from the side of the seat, or lift the recline lever, located floor pins by pulling the...
  • Page 13 Adjusting the Bucket Seats Forward The other lever is located on the rear of the seat. and Rearward There are two adjustment levers on the second row bucket seats that enable them to move forward or rearward. To adjust the second row bucket seats forward or rearward, do the following: 1.
  • Page 14: Folding Or Reclining The Seatbacks

    Folding or Reclining the Seatbacks To fold the seatback forward, do the following: 1. Pull the nylon strap, located on the rear right hand The seatback on a bucket seat can either be folded side of the seat, or lift the recline lever, located forward or reclined using the nylon strap or the recline lever.
  • Page 15: Removing The Bucket Seats

    Removing the Bucket Seats To raise the seatback to the upright position from a reclined position, do the following: To remove the bucket seats, do the following: 1. Pull the nylon strap or lift the recline lever while 1. Make sure the head restraint is in the fully lowered raising the seatback until it locks to the upright position.
  • Page 16 3. Lift either one of the adjuster levers and slide the seat to the most rearward position. See “Adjusting the Bucket Seats Forward and Rearward” earlier in this section. 5. To release the front seat hooks from the floor pins, squeeze the angled bar, located beneath the seat toward the straight crossbar.
  • Page 17 Installing the Bucket Seats To install the bucket seats, do the following: 1. With the seat folded, squeeze the angled bar beneath the seat toward the straight crossbar, while CAUTION: placing the front hooks of the seat into the front two floor pins.
  • Page 18 4. Check that the seat is locked by trying to raise the seat. 5. Pull the nylon strap, located on the rear right hand side of the seat, or lift the recline lever, located on the front right hand side of the seatback, to raise the seatback to the upright position.
  • Page 19: Captain Chairs

    Captain Chairs Your vehicle may have second row captain chairs. If so, they can be adjusted forward or rearward and the seatbacks can be adjusted. Adjusting the Captain Chairs Forward and Rearward There are two manual adjustment bars on each seat. One is located under the front of the seat cushion.
  • Page 20 The armrests can be lowered or raised for easier entry or exit of the vehicle. If your vehicle has captain chairs with side impact airbags, they will have one armrest on the inboard side. Removing a Captain Chair (without a Side Impact Airbag) If your vehicle has captain chairs with side impact airbags, the seats cannot be removed.
  • Page 21 Installing a Captain Chair To install a captain chair, do the following: (without a Side Impact Airbag) CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured.
  • Page 22: Third Row Seat

    CAUTION: A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 3. Push and pull on the seat to be sure it is properly attached.
  • Page 23 Folding the Seatback(s) Returning the Seatback to an Upright Position Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts CAUTION: and return them to their normal stowed position before folding a rear seat.
  • Page 24: Removing The Third Row Seat

    Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 3. Put the seatback in its folded position before removing the seat.
  • Page 25: Installing The Third Row Seat

    5. Lift the seat slightly from the floor to ensure the Do not put the third row seat in so it faces rearward latches are clear of the floor pins. because it will not latch that way. The seat needs to be installed before the convenience center.
  • Page 26: Safety Belts

    Safety Belts 2. Firmly push the rear latches into the rear floor pins by pushing down on the rear of the seat. Safety Belts: They Are for Everyone CAUTION: This part of the manual tells you how to use safety belts properly.
  • Page 27: Why Safety Belts Work

    After more than 40 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does CAUTION: matter... a lot! Why Safety Belts Work It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, When you ride in or on anything, you go as fast as it goes.
  • Page 28 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 1-24...
  • Page 29 The person keeps going until stopped by something. or the instrument panel... In a real vehicle, it could be the windshield... 1-25...
  • Page 30: Questions And Answers About Safety Belts

    Questions and Answers About Safety Belts Will I be trapped in the vehicle after a crash if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
  • Page 31: How To Wear Safety Belts Properly

    Occupants who are not buckled up can be thrown out of If I am a good driver, and I never drive far from the vehicle in a crash. And they can strike others in home, why should I wear safety belts? the vehicle who are wearing safety belts.
  • Page 32 If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. CAUTION: The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 33 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
  • Page 34 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones.
  • Page 35 What is wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
  • Page 36 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
  • Page 37 What is wrong with this? CAUTION: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt.
  • Page 38 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it.
  • Page 39: Lap-Shoulder Belt

    Lap-Shoulder Belt All seating positions in your vehicle have a lap-shoulder belt. Here is how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index. 2.
  • Page 40 5. To make the lap part tight, pull up on the To unlatch the belt, push the button on the buckle. shoulder belt. The belt should go back out of the way. It may be necessary to pull stitching on the safety Before you close a door, be sure the belt is out of belt through the latch plate to fully tighten the the way.
  • Page 41 Shoulder Belt Height Adjuster Safety Belt Pretensioners Your vehicle has a shoulder belt height adjuster for the Your vehicle has safety belt pretensioners for front driver and right front passenger. outboard occupants. Although you cannot see them, they are part of the safety belt assembly. They can help Adjust the height so that the shoulder portion of the belt is tighten the safety belts during the early stages of a centered on your shoulder.
  • Page 42: Rear Safety Belt Comfort Guides

    Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
  • Page 43 3. Be sure that the belt is not twisted and it lies flat. 2. Place the guide over the belt and insert the The elastic cord must be under the belt and the two edges of the belt into the slots of the guide. guide on top.
  • Page 44 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 45: Safety Belt Use During Pregnancy

    Safety Belt Use During Pregnancy The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. Safety belts work for everyone, including pregnant For pregnant women, as for anyone, the key to making women.
  • Page 46: Child Restraints

    Child Restraints The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder Older Children belt until the child passes the below fit test: • Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue.
  • Page 47 What is the proper way to wear safety belts? CAUTION: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face Never do this. or neck. The lap belt should fit snugly below the hips, Here two children are wearing the same belt.
  • Page 48 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. In a crash, the child would not be restrained by the shoulder belt. The child might slide under the lap belt. The belt force would then be applied right on the abdomen.
  • Page 49: Infants And Young Children

    Infants and Young Children CAUTION: Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance People should never hold a baby in their arms traveled nor the age and size of the traveler changes while riding in a vehicle.
  • Page 50 What are the different types of add-on child CAUTION: restraints? Add-on child restraints, which are purchased by the Children who are up against, or very close to, vehicle’s owner, are available in four basic types. any airbag when it inflates can be seriously Selection of a particular restraint should take into injured or killed.
  • Page 51 CAUTION: CAUTION: Newborn infants need complete support, The body structure of a young child is quite including support for the head and neck. unlike that of an adult or older child, for whom This is necessary because a newborn infant’s the safety belts are designed.
  • Page 52: Child Restraint Systems

    Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle’s safety belt system.
  • Page 53 Securing an Add-On Child Restraint in To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems the Vehicle must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system.
  • Page 54: Where To Put The Restraint

    Securing the Child Within the Child Where to Put the Restraint Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children and child restraints CAUTION: be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint;...
  • Page 55 CAUTION: (Continued) CAUTION: If you secure a forward-facing child restraint A child in a rear-facing child restraint can be in the right front seat, always move the front seriously injured or killed if the right front passenger seat as far back as it will go. passenger’s airbag inflates.
  • Page 56: Lower Anchors And Tethers For Children (Latch)

    Lower Anchors and Tethers for Lower Anchors Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
  • Page 57: Top Tether Anchor

    Top Tether Anchor Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached.
  • Page 58 Lower Anchor and Top Tether Anchor To assist you in locating the lower anchors, each Locations seating position with lower anchors has two labels, (Top Tether Anchor): near the crease between Seating positions with top the seatback and the tether anchors. seat cushion.
  • Page 59 Third Row Do not secure a child restraint in a position without a Second Row top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that For the center third row position, if your vehicle has come with the child restraint say that the top tether one, the top tether anchor is located on the seatback, must be attached.
  • Page 60: Securing A Child Restraint Designed For The Latch System

    Securing a Child Restraint Designed for the LATCH System CAUTION: Each top tether anchor and lower anchor in CAUTION: the vehicle is designed to hold only one child restraint. Attaching more than one child If a LATCH-type child restraint is not attached to restraint to a single anchor could cause the anchors, the restraint will not be able to protect anchor or attachment to come loose or even...
  • Page 61 Folding an empty rear seat with the safety belts secured may cause damage to the safety belt or CAUTION: the seat. When removing the child restraint, always remember to return the safety belts to their normal, stowed position before folding the rear seat. Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck 1.
  • Page 62 2. If the child restraint manufacturer recommends that If the position you are using the top tether be attached, attach and tighten the does not have a headrest top tether to the top tether anchor, if equipped. or head restraint and you Refer to the child restraint instructions and are using a dual tether, the following steps:...
  • Page 63: Securing A Child Restraint In A Rear Seat Position

    Securing a Child Restraint in a If the position you are using has an adjustable headrest Rear Seat Position or head restraint and you are using a single tether, When securing a child restraint in a rear seating raise the headrest or head position, study the instructions that came with your child restraint and route the restraint to make sure it is compatible with this vehicle.
  • Page 64 In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If your child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position.
  • Page 65 4. Pull the rest of the shoulder belt all the way out of 5. To tighten the belt, push down on the child restraint, the retractor to set the lock. pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor.
  • Page 66: Securing A Child Restraint In The Right Front Seat Position

    6. If your child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding CAUTION: the use of the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 1-52 for more information. A child in a rear-facing child restraint can be 7.
  • Page 67 If your child restraint has the LATCH system, see Lower 3. Pick up the latch plate, and run the lap and Anchors and Tethers for Children (LATCH) on page 1-52 shoulder portions of the vehicle’s safety belt for how to install your child restraint using LATCH. If you through or around the restraint.
  • Page 68 5. Pull the rest of the shoulder belt all the way out of 6. To tighten the belt, push down on the child restraint, the retractor to set the lock. pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
  • Page 69: Airbag System

    Airbag System If a child restraint has been installed and on indicator is lit, turn the vehicle off. Remove the child restraint from the vehicle and reinstall the child restraint. Your vehicle has the following airbags: If, after reinstalling the child restraint and restarting the •...
  • Page 70 Airbags are designed to supplement the protection provided by safety belts. Even though today’s airbags CAUTION: are also designed to help reduce the risk of injury from the force of an inflating bag, all airbags must inflate very quickly to do their job. Frontal airbags are designed to deploy in moderate to severe frontal and near frontal Here are the most important things to know about the...
  • Page 71 CAUTION: CAUTION: Airbags inflate with great force, faster than Airbags plus lap-shoulder belts offer the the blink of an eye. Anyone who is up against, best protection for adults, but not for young or very close to, any airbag when it inflates children and infants.
  • Page 72: Where Are The Airbags

    Where Are the Airbags? The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side. The driver’s frontal airbag is in the middle of the steering wheel. 1-68...
  • Page 73 If your vehicle has second row captain’s chairs, the seat-mounted side impact airbags (if equipped) are in the side of the seatback closest to the door. CAUTION: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death.
  • Page 74: When Should An Airbag Inflate

    When Should an Airbag Inflate? • If the vehicle goes into an object at an angle, the airbags could inflate at a different crash speed Frontal airbags are designed to inflate in moderate to than if the vehicle goes straight into the object. severe frontal or near-frontal crashes to help reduce the Thresholds can also vary with specific vehicle design.
  • Page 75: What Makes An Airbag Inflate

    How Does an Airbag Restrain? In any particular crash, no one can say whether an airbag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. In moderate to severe frontal or near frontal collisions, For frontal airbags, inflation is determined by what the even belted occupants can contact the steering wheel vehicle hits, the angle of the impact, and how quickly...
  • Page 76: What Will You See After An Airbag Inflates

    What Will You See After an Airbag CAUTION: Inflates? After the frontal and seat-mounted side impact airbags When an airbag inflates, there may be dust inflate, they quickly deflate, so quickly that some people in the air. This dust could cause breathing may not even realize the airbags inflated.
  • Page 77: Passenger Sensing System

    Passenger Sensing System In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur Your vehicle has a passenger sensing system for the from the right front passenger airbag. right front passenger’s position. The passenger airbag status indicator will be visible on the instrument panel •...
  • Page 78 The passenger sensing system works with sensors that are part of the right front passenger’s seat and safety CAUTION: belt. The sensors are designed to detect the presence of a properly-seated occupant and determine if the right front passenger’s frontal airbag and seat-mounted A child in a rear-facing child restraint can be side impact airbag (if equipped) should be enabled seriously injured or killed if the right front...
  • Page 79 The passenger sensing system is designed to turn If a child restraint has been installed and the on off the right front passenger’s frontal airbag and indicator is lit, turn the vehicle off. Remove the child seat-mounted side impact airbag (if equipped) if: restraint from the vehicle and reinstall the child restraint following the child restraint manufacturer’s directions •...
  • Page 80 For some children who have outgrown child restraints and for very small adults, the passenger sensing system may or may not turn off the right front passenger’s frontal airbag and seat-mounted side impact airbag (if equipped), depending upon the person’s seating posture and body build.
  • Page 81 If you ever pull the shoulder portion of the belt out all A thick layer of additional material, such as a blanket or the way, you will engage the child restraint locking cushion, or aftermarket equipment such as seat covers, feature.
  • Page 82: Servicing Your Airbag-Equipped Vehicle

    Servicing Your Airbag-Equipped Adding Equipment to Your Vehicle Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places Is there anything I might add to or change around your vehicle. Your dealer/retailer and the service about the vehicle that could keep the airbags manual have information about servicing your vehicle from working properly?
  • Page 83 Any object, such as an aftermarket seat heater or a Because I have a disability, I have to get my comfort enhancing pad or device, installed under or vehicle modified. How can I find out whether on top of the seat fabric, could also interfere with the this will affect my airbag system? operation of the passenger sensing system.
  • Page 84: Restraint System Check

    Restraint System Check Airbags The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag Checking the Restraint Systems readiness light is working. See Airbag Readiness Light on page 3-36 for more information. Safety Belts Notice: If an airbag covering is damaged, opened, Now and then, make sure the safety belt reminder light or broken, the airbag may not work properly.
  • Page 85: Replacing Restraint System Parts After A Crash

    Replacing Restraint System Parts If your vehicle has the LATCH system and it was being used during a crash, you may need new LATCH After a Crash system parts. New parts and repairs may be necessary even if the belt or LATCH system (if equipped), was not being used CAUTION: at the time of the crash.
  • Page 86 NOTES 1-82...
  • Page 87: Features And Controls

    Section 2 Features and Controls Keys ...............2-3 Theft-Deterrent Systems ........2-27 Remote Keyless Entry (RKE) System ....2-4 Content Theft-Deterrent .........2-27 ® Remote Keyless Entry (RKE) System PASS-Key III ..........2-29 ® Operation ...........2-5 PASS-Key III Operation .......2-30 Remote Vehicle Start ........2-8 Starting and Operating Your Vehicle ....2-31 Doors and Locks ..........2-10 New Vehicle Break-In ........2-31 Door Locks ..........2-10...
  • Page 88 Section 2 Features and Controls Mirrors ............2-43 Storage Areas ..........2-54 Manual Rearview Mirror .........2-43 Glove Box ...........2-54 Outside Power Mirrors ........2-43 Cupholder(s) ..........2-55 Outside Convex Mirror ........2-44 Overhead Console (Without Rail) ....2-55 Outside Heated Mirrors ........2-44 Overhead Console (With Rail) ......2-55 Floor Console Storage Area ......2-57 Object Detection Systems .......2-44 Folding Tray ..........2-57...
  • Page 89: Keys

    Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a closing...
  • Page 90: Remote Keyless Entry (Rke) System

    ® Any new PASS-Key III key must be programmed This device complies with RSS-210 of Industry Canada. ® before it will start your vehicle. See PASS-Key Operation is subject to the following two conditions: on page 2-29 for more information on programming 1.
  • Page 91: Remote Keyless Entry (Rke) System Operation

    Remote Keyless Entry (RKE) (Remote Vehicle Start): If your vehicle has this feature, you can start the engine from outside the System Operation vehicle. See Remote Vehicle Start on page 2-8 for additional information. You can lock and unlock the vehicle’s doors and the liftgate using the Remote Keyless Entry (RKE) (Lock): To lock all doors and the liftgate, press the transmitter supplied with your vehicle.
  • Page 92: Remote Power Sliding Door Operation

    If your vehicle has the content theft-deterrent system, The van symbol on the left is for the driver’s side sliding the unlock button on the RKE transmitter will disarm the door and the van symbol on the right is for the system.
  • Page 93: Battery Replacement

    Matching Transmitter(s) to Your Vehicle Each RKE transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer/retailer. Remember to bring any remaining transmitters with you when you go to your dealer/retailer. When the dealer/retailer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched.
  • Page 94: Remote Vehicle Start

    Remote Vehicle Start To start the engine using the remote start feature, do the following: This feature allows you to start the engine from outside 1. Aim the RKE transmitter, equipped with the remote the vehicle. It may also turn the rear window defogger vehicle start button, at the vehicle.
  • Page 95: Remote Start Ready

    • After your vehicle’s engine has been started two times The hazard warning flashers are on. using the remote start button, the vehicle’s ignition • There is an emission control system malfunction. switch must be turned to ON/RUN and then back to •...
  • Page 96: Doors And Locks

    Doors and Locks There are several ways to lock and unlock your vehicle. From the outside, use your key or the remote keyless entry transmitter. Door Locks To unlock the driver’s door from the outside with the key, insert the key and turn it toward the front of CAUTION: the vehicle.
  • Page 97: Power Door Locks

    Power Door Locks Your vehicle has power door locks. The switches are located on the driver’s and front passenger’s door. Press the top of the switch to unlock the doors and liftgate. From the inside, use the manual or power door locks. To unlock either front door from the inside, pull back With the content theft-deterrent system, the power door on the manual lever.
  • Page 98: Delayed Locking

    Delayed Locking If the key is in the ignition, this feature will not lock the doors. This feature allows the locking of the vehicle to be To turn the delayed locking feature off or on, see DIC delayed until all doors have been closed for Vehicle Personalization (Uplevel Only) on page 3-70.
  • Page 99: Automatic Door Lock

    Automatic Door Lock Lockout Protection All of the doors will lock automatically when you move The lockout protection feature makes it more difficult the shift lever out of PARK (P). This feature cannot to lock the key in the vehicle. If the driver’s door is be disabled.
  • Page 100: Sliding Door Lock

    Sliding Door Lock CAUTION: If your vehicle is facing downward on a steep grade (15 percent or more), the door may not stay open and could slam shut, possibly injuring someone. To make sure the door does not slam shut be sure to hold it open until everyone is clear of the door, and only then allow it to slowly close.
  • Page 101 With the power door locks, the sliding door lock has a If your vehicle has power sliding door(s), you can delay feature. See Delayed Locking on page 2-12 and prevent power opening of the sliding door from the DIC Vehicle Personalization (Uplevel Only) on page 3-70. passenger power sliding door (PSD) activation switch by pressing the PSD second row passenger override Sliding Door Security Lock...
  • Page 102: Power Sliding Door (Psd)

    Power Sliding Door (PSD) If your vehicle has a single power sliding door (PSD), you have this switch. If your vehicle has this feature, you can open and close the power sliding door(s) using the switches inside your vehicle. You can also operate the sliding door(s) with your remote keyless entry transmitter.
  • Page 103 Your vehicle also has There are several ways to open and close the power passenger power sliding sliding door(s). door activation switch(es). • If your vehicle has a single power sliding door, press the top of the overhead console PSD activation/override (deactivation) switch.
  • Page 104 If a power sliding door is locked, it cannot be unlocked If the power sliding door(s) is open or in the process and opened using the overhead console PSD of closing when you shift out of PARK (P), a chime will switch(es) or the passenger PSD activation switch(es).
  • Page 105 Resistance must be as strong as the force of the closing door, or stronger. The force of the closing door increases significantly as the door approaches the latched position. The driver’s side sliding door is designed to open only a little if the fuel door is open. If this ever happens, do not try to force the sliding door.
  • Page 106 CAUTION: If your vehicle is facing downward on a steep grade (15 percent or more), the door may not stay open and could slam shut, possibly injuring someone. To make sure the door does not slam shut, turn on the power sliding door feature.
  • Page 107: Resetting The Power Sliding Door

    Power Sliding Door Second Row To stop the door(s) immediately while the door(s) is opening or closing, press the PSD override Passenger Override (Deactivation) (deactivation) part of the switch. To help avoid accidental operation of the sliding door(s) Pressing the PSD button(s) on the remote keyless by using the passenger PSD activation switch, press entry will open and close the door unless the door has the override (deactivation) part of the overhead console...
  • Page 108: Liftgate

    Liftgate If any of these conditions occur, the power sliding door may need to be reset. If your vehicle has the dual power sliding doors, both doors will have to be reset. To unlock or lock the liftgate from the outside, use the To reset a door, do the following: remote keyless entry transmitter.
  • Page 109 CAUTION: It can be dangerous to drive with the liftgate open because carbon monoxide (CO) gas can come into your vehicle. You cannot see or smell CO. It can cause unconsciousness and even death. If you must drive with the liftgate open or if electrical wiring or other cable connections must pass through the seal between the body and the liftgate:...
  • Page 110: Windows

    Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 111: Power Windows

    Power Windows The switches on the driver’s door armrest control the front windows when the ignition is in CAUTION: RUN, ACCESSORY or when Retained Accessory Power (RAP) Leaving children, helpless adults, or pets in a is active. See Retained vehicle with the windows closed is dangerous. Accessory Power (RAP) They can be overcome from extreme heat in on page 2-33.
  • Page 112: Manual Rear Quarter Windows

    Manual Rear Quarter Windows Power Rear Quarter Windows Your vehicle may have manual rear quarter windows. Your vehicle may have power rear quarter windows. To open, pull the latch This switch, located in forward to release it, the overhead console then swing the window switchbank, is used outward.
  • Page 113: Sun Visors

    Sun Visors Theft-Deterrent Systems To block out glare, swing down the sun visors. You can Vehicle theft is big business, especially in some cities. also remove them from the center mount and swing Although your vehicle has a number of theft-deterrent them to the side.
  • Page 114 Arming with the Remote Keyless While armed, the doors will not unlock with the power door lock switch. Entry Transmitter Once armed, the alarm will go off if someone tries to Your alarm system will arm if the key is not in the enter the vehicle without using the remote keyless entry ignition and you use your remote keyless entry transmitter or a key, or turns the ignition to ON/RUN.
  • Page 115: Disarming With Your Key

    ® Arming Confirmation PASS-Key If remote unlock confirmation is on, the turn signal ® Your PASS-Key III system operates on a radio lamps will flash briefly to let you know when your alarm frequency subject to Federal Communications system has disarmed. If you would not like the turn Commission (FCC) Rules and with Industry Canada.
  • Page 116: Pass-Key

    ® PASS-Key III Operation service. If your vehicle does start, the first key may be faulty. See your dealer/retailer or a locksmith who ® ® can service the PASS-Key III to have a new key made. Your vehicle is equipped with the PASS-Key (Personalized Automotive Security System) ®...
  • Page 117: Starting And Operating Your Vehicle

    Starting and Operating 4. Insert the key to be programmed and turn it to ON/RUN within 10 seconds of removing the Your Vehicle previous key. The security message will turn off once the key has been programmed. It may not be apparent that New Vehicle Break-In the security message went on due to how quickly the key is programmed.
  • Page 118: Ignition Positions

    Ignition Positions Notice: Using a tool to force the key from the ignition switch could cause damage or break the key. Use the correct key and turn the key only with The key can be turned to one of four positions while in your hand.
  • Page 119: Retained Accessory Power (Rap)

    Key In the Ignition Starting the Engine Never leave your vehicle with the keys inside, as it is an Move your shift lever to PARK (P) or NEUTRAL (N). easy target for joy riders or thieves. If you leave the Your engine will not start in any other position –...
  • Page 120: Engine Coolant Heater

    To prevent gear damage, this system also prevents Notice: The engine is designed to work with the cranking if the engine is already running. Engine electronics in your vehicle. If you add electrical cranking can be stopped by turning the ignition parts or accessories, you could change the way the switch to the ACC/ACCESSORY or LOCK/OFF engine operates.
  • Page 121: Automatic Transmission Operation

    Automatic Transmission Operation CAUTION: Plugging the cord into an ungrounded outlet could cause an electrical shock. Also, the wrong kind of extension cord could overheat and cause a fire. You could be seriously injured. Plug the cord into a properly grounded three-prong 110-volt AC outlet.
  • Page 122 If you cannot shift out of PARK (P), ease pressure on REVERSE (R): Use this gear to back up. the shift lever and push the shift lever all the way info Notice: Shifting to REVERSE (R) while your vehicle PARK (P) as you maintain brake application. Then press is moving forward could damage the transmission.
  • Page 123 Warm-Up Shift Notice: Shifting out of PARK (P) or NEUTRAL (N) with the engine running at high speed may damage Your vehicle has a computer controlled transmission the transmission. The repairs would not be designed to warm up the engine faster when the outside covered by your warranty.
  • Page 124: Parking Brake

    Parking Brake Notice: If your vehicle seems to start up rather slowly, or if it seems not to shift gears as you go faster, something may be wrong with a transmission The parking brake is system sensor. If you drive very far that way, your located under the vehicle can be damaged.
  • Page 125: Shifting Into Park (P)

    Shifting Into PARK (P) If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 3-39. To release the parking brake, hold the regular brake CAUTION: pedal down with your right foot while you push down on the parking brake pedal with your left foot.
  • Page 126: Leaving Your Vehicle With The Engine Running

    Leaving Your Vehicle With the Torque Lock Engine Running If you are parking on a hill and you do not shift your vehicle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the CAUTION: transmission.
  • Page 127: Shifting Out Of Park (P)

    Shifting Out of PARK (P) To shift out of PARK (P) use the following: 1. Apply the brake pedal. This vehicle is equipped with an electronic shift lock 2. Move the shift lever to the desired position. release system. The shift lock release is designed to: If you still are unable to shift out of PARK (P): •...
  • Page 128: Engine Exhaust

    Engine Exhaust Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell.
  • Page 129: Mirrors

    Mirrors CAUTION: Manual Rearview Mirror It can be dangerous to get out of your vehicle When you are sitting in a comfortable driving position, if the shift lever is not fully in PARK (P) with adjust the mirror so you can see clearly behind your vehicle.
  • Page 130: Outside Convex Mirror

    Outside Heated Mirrors Use the arrows on the bottom control to adjust the position of each mirror. Adjust each mirror so that you can see the side of your vehicle and the area If the vehicle has outside heated rearview mirrors, behind it, while sitting in a comfortable driving position.
  • Page 131: How The System Works

    The display is located near the rear window and can CAUTION: be seen by looking over your right shoulder. The Ultrasonic Rear Parking Assist (URPA) system does not replace driver vision. It cannot detect: • objects that are below the bumper, underneath the vehicle, or if they are too close or far from the vehicle •...
  • Page 132 A single beep will sound the first time an object is While the system is disabled, an indicator light will be lit detected between 20 inches (0.5 m) and 5 feet (1.5 m) on the switch. You will not see any lights on the rear away.
  • Page 133: Onstar System

    ® OnStar System A complete OnStar Owner’s Guide and the OnStar Terms and Conditions are included in the vehicle’s OnStar Subscriber glove box literature. For more information, visit onstar.com or onstar.ca, contact OnStar at 1-888-4-ONSTAR (1-888-466-7827) or TTY 1-877-248-2080, or press the OnStar button to speak with an OnStar advisor 24 hours a day, 7 days a week.
  • Page 134: Onstar Virtual Advisor

    Available Services with Safe & Sound Plan OnStar Hands-Free Calling • Automatic Notification of Airbag Deployment OnStar Hands-Free Calling allows eligible OnStar subscribers to make and receive calls using voice • Advanced Automatic Crash Notification (AACN) commands. Hands-Free Calling is fully integrated (If equipped) into the vehicle, and can be used with OnStar Pre-Paid •...
  • Page 135: How Onstar Service Works

    On some vehicles, you may have to hold the button for OnStar service also cannot work unless you are in a a few seconds and give the command “ONSTAR” in place where the wireless service provider OnStar order to activate the OnStar Hands-Free Calling feature. has hired for that area has coverage, network capacity and reception when the service is needed, and On some vehicles, the mute button can be used to...
  • Page 136: Universal Home Remote System

    Universal Home Remote Universal Home Remote System Operation (With One Triangular LED) System Universal Home Remote System The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting.
  • Page 137: Programming The Universal Home Remote System

    Keep the original hand-held transmitter for use in other To program up to three devices: vehicles as well as for future Universal Home Remote programming. It is also recommended that upon the sale of the vehicle, the programmed Universal Home Remote buttons should be erased for security purposes.
  • Page 138 3. At the same time, press and hold both the Universal If the Universal Home Remote indicator light Home Remote button that you would like to use to blinks rapidly for two seconds and then turns to control the garage door and the hand-held a constant light, continue with the programming transmitter button.
  • Page 139: Gate Operator And Canadian Programming

    Gate Operator and Canadian 7. Firmly press and release the “Learn” or “Smart” button. After you press this button, you will have Programming 30 seconds to complete Step 8. If you have questions or need help programming the 8. Immediately return to the vehicle. Firmly press and Universal Home Remote System, call 1-800-355-3515 hold the Universal Home Remote button, chosen in or go to www.homelink.com.
  • Page 140: Storage Areas

    Using Universal Home Remote Reprogramming a Single Universal Home Remote Button Press and hold the appropriate Universal Home Remote button for at least half of a second. The indicator light To reprogram any of the three Universal Home Remote will come on while the signal is being transmitted. buttons, repeat the programming instructions earlier in this section, beginning with Step 2.
  • Page 141: Cupholder(S)

    Cupholder(s) Overhead Console (With Rail) There are cupholders located below the center If your vehicle is equipped with an overhead console, instrument panel switchbank. The cupholders have a it may contain the following: rubber liner that can be removed, so that larger cups •...
  • Page 142: Storage Bin

    Storage Bin Your vehicle may have a storage bin located on the overhead rail that you can use for storage. 4. Firmly press down making sure the latch is flat with the ribs (A) on the storage bin. 5. Switch hands and repeat Steps 2 through 4 for the latch on the opposite side of the storage bin.
  • Page 143: Floor Console Storage Area

    Floor Console Storage Area Your vehicle may have a storage compartment located on the front console below the front cupholders. Pull up and then forward on the handle to open the storage compartment. Folding Tray Your vehicle may be equipped with folding convenience trays located between seats.
  • Page 144: Second Row Center Console

    Second Row Center Console Replacing the Center Console If your vehicle has the second row center console, use the following procedure to remove or install CAUTION: the console. Removing the Center Console A second row center console that is not locked into place properly can move around in a 1.
  • Page 145: Luggage Carrier

    Luggage Carrier If you have the luggage carrier, you can load things on top of your vehicle. Crossrails are not standard on this vehicle and must be purchased at your dealer. CAUTION: Notice: Loading cargo on the luggage carrier that weighs more than 150 lbs (68 kg) or hangs over the rear or sides of the vehicle may damage your If you try to carry something on top of your...
  • Page 146: Convenience Net (With Rear Convenience Center)

    Convenience Net Convenience Net (With Rear Convenience Center) (Without Rear Convenience Center) Your vehicle may have a convenience net. The Your vehicle may have a convenience net. The convenience net is designed to help keep small loads, convenience net is designed to help keep small loads, from falling out of the vehicle when the liftgate is like grocery bags, from falling over.
  • Page 147: Convenience Center

    Convenience Center To close the convenience center cover, you must pull one of the prop rod linkages toward you while holding onto the door latch and lower the convenience center cover to close it. CAUTION: Removing the Convenience Center If any removable convenience item is not 1.
  • Page 148: Replacing The Convenience Center

    Replacing the Convenience Center 6. Turn the hand knob clockwise until it is tight. 7. Pull up on the convenience center to make sure 1. Make sure the third row seat is properly installed in it is locked into place. the vehicle.
  • Page 149 Section 3 Instrument Panel Instrument Panel Overview .......3-4 Electric Power Management ......3-19 Hazard Warning Flashers ........3-6 Battery Run-Down Protection ......3-20 Other Warning Devices ........3-6 Overhead Console Switchbank .......3-20 Horn .............3-6 Accessory Power Outlet(s) ......3-21 Tilt Wheel .............3-6 Power Outlet 115 Volt Alternating Current ..3-22 Turn Signal/Multifunction Lever ......3-7 Cigarette Lighter ...........3-23 Turn and Lane-Change Signals ......3-7...
  • Page 150 Section 3 Instrument Panel Tire Pressure Light ........3-41 Audio System(s) ..........3-78 Malfunction Indicator Lamp ......3-42 Setting the Time ...........3-79 Oil Pressure Light .........3-45 Radio(s) (MP3) ..........3-79 Security Light ..........3-45 Using an MP3 ..........3-90 Cruise Control Light ........3-46 XM Radio Messages ........3-93 Highbeam On Light ........3-46 Navigation/Radio System .......3-94 Fuel Gage ...........3-46...
  • Page 151 NOTES...
  • Page 152: Instrument Panel Overview

    Instrument Panel Overview...
  • Page 153 The main components of the instrument panel are the following: A. Air Outlets. See Outlet Adjustment on page 3-28. I. Audio System. See Audio System(s) on page 3-78. B. Turn Signal/Multifunction Lever. See Turn J. Exterior Lamps Control. See Exterior Lamps on Signal/Multifunction Lever on page 3-7.
  • Page 154: Hazard Warning Flashers

    Hazard Warning Flashers Horn The hazard warning flashers let you warn the police and Press near or on the horn symbols on the steering others that you have a problem. The front and rear wheel pad to sound the horn. turn signal lamps will flash on and off.
  • Page 155: Turn Signal/Multifunction Lever

    Turn Signal/Multifunction Lever • Rear Window Wiper. See Windshield Washer on page 3-9. • Rear Window Washer. See Windshield Washer on page 3-9. For information on the headlamps, see Exterior Lamps on page 3-14. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions.
  • Page 156: Headlamp High/Low-Beam Changer

    Headlamp High/Low-Beam Changer As you signal a turn or a lane change, if the arrow flashes faster than normal, a signal bulb may be burned out and other drivers will not see your turn signal. To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you.
  • Page 157: Windshield Wipers

    Windshield Wipers Be sure to clear ice and snow from the wiper blades before using them. If they are frozen to the windshield, carefully loosen or thaw them. If your blades do become You control the windshield wipers by turning the band worn or damaged, get new blades or blade inserts.
  • Page 158: Rear Window Wiper/Washer

    Rear Window Wiper/Washer (Rear Washer/Wiper): Move the lever to this position to wash and wipe the rear window. The rear window washer uses the same fluid bottle as CAUTION: the windshield washer. However, the rear window washer will run out of fluid before the windshield washer. If you can wash your windshield but not your rear In freezing weather, do not use your washer window, check the fluid level.
  • Page 159: Setting Cruise Control

    The cruise control lever is your foot on the accelerator. This is helpful on long located below the trips. Cruise control does not work at speeds below windshield wiper control on about 25 mph (40 km/h). the right side of the When the brakes are applied, the cruise control steering wheel.
  • Page 160 3. Push down on the cruise control lever and release vehicle speed will increase until the lever is released or it. This will set the speed in cruise control. the brakes are applied. Do not continue to hold the lever in the plus (resume/accelerate) position, unless a 4.
  • Page 161 Reducing Speed While Using Cruise the vehicle’s speed. When going downhill, the brakes might have to be applied, or the transaxle might have to Control be shifted to a lower gear to keep the vehicle’s speed There are two ways to reduce the vehicle’s speed while down.
  • Page 162: Exterior Lamps

    Exterior Lamps AUTO (Automatic): Turn the control to this position to set your headlamps in automatic mode. AUTO mode, if enabled, will turn the exterior lamps on and off The control to the left of automatically depending on how much light is available the steering column outside the vehicle.
  • Page 163: Wiper Activated Headlamps

    Wiper Activated Headlamps Daytime Running Lamps (DRL)/ Automatic Headlamp System This feature, if equipped, will automatically activate the headlamps and parking lamps after the windshield Daytime Running Lamps (DRL) can make it easier for wipers have been in use for about 30 seconds and when others to see the front of your vehicle during the all of the following conditions are met.
  • Page 164: Instrument Panel Brightness

    Instrument Panel Brightness If you start your vehicle in a dark garage, the automatic headlamp system will come on immediately. Once you leave the garage, it will take approximately The knob to adjust the one minute for the automatic headlamp system to instrument panel change to DRL if it is light outside.
  • Page 165: Interior Lamps Control

    Interior Lamps Control Dome Lamp The dome lamp is located in the headliner and has two The interior lamp control is buttons to manually turn it on or off. The dome lamp located to the right of the will come on each time you open a door, unless you turn exterior lamp controls on the interior lamps override feature.
  • Page 166: Delayed Lighting

    Exit Lighting The interior lamps may stay on for up to 25 seconds after all doors have been closed if they have not been locked. See Delayed Lighting on page 3-18. With exit lighting, the interior lamps will come on for about 25 seconds whenever you remove the key from To turn the entry lighting feature off or on, see DIC the ignition.
  • Page 167: Rear Reading Lamps

    Rear Reading Lamps gage or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert There are two reading lamps in the third row headliner. will be displayed.
  • Page 168: Battery Run-Down Protection

    Battery Run-Down Protection Overhead Console Switchbank Your vehicle has a feature to help prevent you from draining the battery, in case you accidentally leave the interior lamps on. If you leave any interior lamps on while the ignition is in lock or off, they will automatically turn off after 10 minutes.
  • Page 169: Accessory Power Outlet(S)

    Accessory Power Outlet(s) Certain electrical accessories may not be compatible with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a The accessory power outlets can be used to plug in problem see your dealer for additional information electrical equipment such as a cellular telephone or on accessory power outlets.
  • Page 170: Power Outlet 115 Volt Alternating Current

    Power Outlet 115 Volt Alternating The indicator light does not come on when the ignition is in LOCK/OFF or if no equipment is plugged into Current the outlet. If you try to connect equipment using more than Your vehicle may have a power outlet that can be used 150 watts or a system fault is detected, a protection to plug in electrical equipment that uses a maximum circuit shuts off the power supply and the indicator light...
  • Page 171: Cigarette Lighter

    Cigarette Lighter Your vehicle may have a cigarette lighter. To use the lighter, located on the instrument panel below the climate controls, push it in all the way and let go. When it is ready, it will pop back out by itself. Notice: Holding a cigarette lighter in while it is heating does not let the lighter back away from the heating element when it is hot.
  • Page 172 to make adjustments to help with fuel economy while (Floor): This mode directs most of the air to the still maintaining the selected temperature. floor outlets. Use this mode to send air to the rear of the vehicle. Keep the area under the front seats free of On hot days, open the windows to let hot inside air objects that could obstruct airflow to the rear of the escape;...
  • Page 173: Defogging And Defrosting

    Defogging and Defrosting Rear Window Defogger Fog on the inside of windows is a result of high humidity, The rear window defogger uses a warming grid to or moisture, condensing on the cool window glass. remove fog from the rear window. This can be minimized if the climate control system is <...
  • Page 174: Dual Climate Control System

    Dual Climate Control System Turn the right knob clockwise or counterclockwise to direct the airflow inside of your vehicle. Your vehicle may have a dual climate control system. To change the current mode, select one of the following: With this system you can control the heating, cooling, and ventilation for your vehicle.
  • Page 175 Outside Air: This mode is automatically selected when (Heated Seats): Press this button to turn on the your vehicle is in any mode except maximum air heated seats. The button on the left controls the driver’s conditioning. seat and the button on the right controls the passenger’s seat.
  • Page 176: Outlet Adjustment

    Outlet Adjustment (Defrost): This mode directs most of the air to the windshield and the side window outlets, with some Use the louvers located on the air outlets to change the air directed to the floor outlets. In this mode, the system direction of the airflow.
  • Page 177: Rear Climate Control System

    Rear Climate Control System Your vehicle may also have a rear climate control system that lets the rear passengers adjust the temperature and fan speed for the rear seating area. Your vehicle may have a rear climate control system that lets the driver adjust the fan speed for the rear When the front climate control is in AUX and the seating area.
  • Page 178: Rear Air Outlets

    Rear Air Outlets (Increase Setting): Press this button to increase the fan or temperature setting while arrows The outlet behind the driver side rear seat is for the cold are displayed. air return. Be sure to keep it free from obstructions. Also, keep the area around the base of the center (Fan) (Temperature): Press this button once to...
  • Page 179 The access panel for the passenger compartment air filter is located in the back of the glove box. To replace the filter, do the following: 2. Then push the tab, located on the left of the inner access panel, to the right. 3.
  • Page 180: Warning Lights, Gages, And Indicators

    Warning Lights, Gages, and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages Indicators and warning lights work together to let you know when there’s a problem with your vehicle. This part describes the warning lights and gages that When one of the warning lights comes on and stays on may be on your vehicle.
  • Page 181: Instrument Panel Cluster

    Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, how much fuel you are using, and many other things you will need to drive safely and economically.
  • Page 182: Speedometer And Odometer

    Speedometer and Odometer Trip Odometer Your speedometer lets you see your speed in both The trip odometer can display how far you have driven miles per hour (mph) and kilometers per hour (km/h). since you last reset it. Your odometer shows how far your vehicle has For more information see DIC Operation and Displays been driven, in either miles (used in the United States) on page 3-48.
  • Page 183: Safety Belt Reminders

    Safety Belt Reminders Passenger Safety Belt Reminder Light Several seconds after the engine is started, a chime Safety Belt Reminder Light will sound for several seconds to remind the front passenger to buckle their safety belt. This would only When the engine is started, a chime will come on for occur if the passenger airbag is enabled.
  • Page 184: Airbag Readiness Light

    Airbag Readiness Light CAUTION: There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag’s electrical system for If the airbag readiness light stays on after you malfunctions. The light tells you if there is an electrical start your vehicle, it means the airbag system problem.
  • Page 185: Passenger Airbag Status Indicator

    Passenger Airbag Status Indicator If the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger’s frontal airbag and seat-mounted side impact airbag (if Your vehicle has the passenger sensing system. equipped) are enabled (may inflate). Your instrument panel has a passenger airbag status indicator.
  • Page 186: Charging System Light

    CAUTION: CAUTION: Even though the passenger sensing system is If the airbag readiness light in the instrument designed to turn off the right front passenger’s panel cluster ever comes on and stays on, it frontal airbag and seat-mounted side impact means that something may be wrong with the airbag (if equipped) if the system detects a airbag system.
  • Page 187: Brake System Warning Light

    It should go out once the engine is running. If it stays This light should come on on, or comes on while you are driving, you may have a briefly when you turn the problem with the charging system. A charging system ignition key to RUN.
  • Page 188: Antilock Brake System Warning Light

    Antilock Brake System Warning Traction Control System (TCS) Light Warning Light For vehicles with the Your vehicle is equipped Antilock Brake System with a traction control (ABS), this light will come system warning light. on briefly when you start the engine. That is normal.
  • Page 189: Engine Coolant Temperature Gage

    Tire Pressure Light If the traction control system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service. Your vehicle has a tire pressure light. Engine Coolant Temperature Gage This gage shows the engine coolant temperature.
  • Page 190: Malfunction Indicator Lamp

    When the Light Flashes First and Then Malfunctions often are indicated by the system before any problem is apparent. This can prevent more serious is Solid damage to your vehicle. This system is also designed This indicates that there may be a problem with the Tire to assist your service technician in correctly diagnosing Pressure Monitor System.
  • Page 191: If The Light Is On Steady

    This light comes on, as a check to show it is working, If the light continues to flash, when it is safe to do so, when the ignition is turned ON/RUN but the engine is not stop the vehicle. Find a safe place to park the vehicle. running.
  • Page 192: Emissions Inspection And Maintenance Programs

    Emissions Inspection and Maintenance Have you recently changed brands of fuel? Programs If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 5-5. Poor fuel quality causes Some state/provincial and local governments have or the engine not to run as efficiently as designed.
  • Page 193: Maintenance Schedule

    Oil Pressure Light This light will come on briefly when you start your engine. If it does not, have your vehicle serviced. CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches fire.
  • Page 194: Cruise Control Light

    Cruise Control Light Fuel Gage This light comes on When the indicator nears whenever you set the empty, you still have a little cruise control. fuel left, but you should get more soon. The light goes out when the cruise control is turned off. See Cruise Control on page 3-10 for more information.
  • Page 195: Low Fuel Warning Light

    Low Fuel Warning Light The DIC displays the odometer, trip odometers, fuel economy, trip computer, vehicle system information, and compass display, if equipped. It also displays warning The light next to the fuel gage will come on briefly when messages if a system problem is detected. In addition, you are starting the engine.
  • Page 196: Dic Operation And Displays

    DIC Operation and Displays (Menu): Press this button to display the units, language, personalization, if equipped, compass zone The DIC has different modes which can be accessed by and compass calibration, if equipped. See DIC pressing the DIC buttons located on the center of the Vehicle Personalization (Uplevel Only) on page 3-70 instrument panel.
  • Page 197 There is also a retroactive trip odometer function that TIME ELAPSED feature will automatically start timing performs the following for each trip odometer: where it left off when you last stopped. To reset it, press and hold the set/reset button for about 1.5 seconds. •...
  • Page 198: Maintenance Schedule

    This is because different driving conditions produce If there is a problem with the battery charging system, a different fuel economies. Generally, freeway driving DIC message will display. See DIC Warnings and produces better fuel economy than city driving. Messages on page 3-54 and Electric Power Fuel range cannot be reset.
  • Page 199 Tire Pressure Menu Button Items Press the information button until FRONT TIRE (Menu): Press this button to scroll through the PRESSURE displays. This mode shows the pressure following items: for the front tires. To view the pressure for the rear tires, press the information button again until REAR TIRE Units PRESSURE displays.
  • Page 200: Dic Compass (Uplevel Only)

    Personalization (Uplevel Only) DIC Compass (Uplevel Only) Press the menu button until PERSONAL PROGRAM Your vehicle may have a compass in the Driver displays. Your vehicle may have personalization Information Center (DIC). capabilities that allow you to program certain features to a preferred setting for up to two drivers.
  • Page 201: Compass Calibration

    To adjust for compass variance, use the following 3. Press the set/reset button to scroll through and procedure: select the appropriate variance zone. The direction the vehicle is moving will be shown in Compass Variance (Zone) Procedure the top right corner of the DIC display. 1.
  • Page 202: Dic Warnings And Messages

    To calibrate the compass, use the following procedure: Some messages may not require immediate action, but you can press any of the DIC buttons to acknowledge Compass Calibration Procedure that you received the message and clear it from the DIC display. 1.
  • Page 203: Battery Saver Active

    When the coolant temperature returns to normal, the air The normal battery voltage range is 11.5 to 15.5 volts. conditioning compressor turns back on. You can You can monitor the battery voltage by pressing the continue to drive your vehicle. information button until BATTERY displays.
  • Page 204: Check Tire Pressure

    CHARGING SYSTEM FAILURE to acknowledge this message and to clear it from the screen. This message displays when there is a problem with the This message continues to display for two seconds if it generator and battery charging systems. Driving with has not been acknowledged when the engine is this problem could drain the battery.
  • Page 205 DRIVER’S DOOR AJAR This message displays while the ignition is in ON/RUN. Press any of the DIC buttons to acknowledge this This message displays when the driver door is not message and to clear it from the screen. closed properly. Make sure that the door is closed This message continues to display for two seconds if it completely.
  • Page 206: Engine Coolant Hot

    This message continues to display for two seconds if it This message continues to display for two seconds if it has not been acknowledged when the engine is has not been acknowledged when the engine is turned off. It also re-displays for two seconds if the turned off.
  • Page 207: Hood Ajar

    HOOD AJAR This message continues to display for two seconds if it has not been acknowledged when the engine is If your vehicle has the remote start feature, this turned off. It also re-displays for two seconds if the message displays when the hood is not closed properly. message has been acknowledged, but the condition Make sure that the hood is closed completely.
  • Page 208 LIFT GATE AJAR This message continues to display for two seconds if it has not been acknowledged when the engine is This message displays when the liftgate is not closed turned off. It also re-displays for two seconds if the completely.
  • Page 209: Low Fuel

    LOW OIL PRESSURE This message displays and a chime sounds only while the ignition is in ON/RUN. Press any of the DIC buttons to acknowledge this message and to clear it Notice: If the LOW OIL PRESSURE warning from the screen. message appears on the DIC display, stop the vehicle immediately.
  • Page 210: Parking Brake On

    PARKING BRAKE ON PARK LAMPS ON This message displays to alert the driver when the This message displays to alert the driver when the vehicle’s parking brake is on, the ignition is in ON/RUN, headlamps or parking lamps are on while the ignition is and the vehicle speed is greater than 5 mph (8 km/h).
  • Page 211: Reduced Engine Power

    PASSENGER’S REAR DOOR AJAR The reminder will be repeated if the ignition is on, the vehicle is in motion, the driver is unbuckled and the This message displays when the passenger side rear passenger is still unbuckled and the passenger airbag is door is not closed properly.
  • Page 212 REDUCED POWER STOP WHEN SAFE REMOTE START DISABLED This message displays when your vehicle is in an If your vehicle has the remote start feature, this message overheated engine operating mode. This operating mode displays if a remote start attempt is unsuccessful. This allows your vehicle to be driven to a safe place in an may be caused if any of the following conditions are true emergency.
  • Page 213 REMOTE START ON This message displays while the ignition is in ON/RUN. Press any of the DIC buttons to acknowledge this If your vehicle has the remote start feature, this message and to clear it from the screen. message displays when a remote start is initiated. See This message continues to display for two seconds if it “Remote Vehicle Start”...
  • Page 214: Service Brake System

    SERVICE BRAKE SYSTEM This message continues to display for two seconds if it has not been acknowledged when the engine is This message displays when a problem with the brake turned off. It also re-displays for two seconds if the system has been detected.
  • Page 215: Service Tire Monitor System

    This message only displays while the ignition is in This message continues to display for two seconds if it ON/RUN. Press any of the DIC buttons to acknowledge has not been acknowledged when the engine is this message and to clear it from the screen. turned off.
  • Page 216: Service Vehicle Soon

    SERVICE TRACTION SYSTEM This message continues to display for two seconds if it has not been acknowledged when the engine is If your vehicle has the Traction Control System (TCS), turned off. It also re-displays for two seconds if the this message displays when the system is not message has been acknowledged, but the condition still functioning properly.
  • Page 217 This message displays only while the ignition is in This message only displays while the ignition is in ON/RUN. ON/RUN and will not disappear until driving conditions change and the TCS is no longer active. Any of the following conditions may cause the ®...
  • Page 218: Dic Vehicle Personalization (Uplevel Only)

    TRANSMISSION FLUID HOT DIC Vehicle Personalization (Uplevel Only) This message displays when the transmission fluid in your vehicle is too hot. Stop the vehicle and allow Your vehicle may have customization capabilities that it to idle until it cools down. If the warning message allow you to program certain features to one preferred continues to display, have the vehicle serviced by your setting.
  • Page 219 Entering the Personal Program Menu The personalization features include the following: • Radio station presets 1. Turn the ignition on and place the vehicle • in PARK (P). Auto door unlock preferences To avoid excessive drain on the battery, it is •...
  • Page 220 Customization Menu Items ALL KEYS RESET This screen will only display if YES was selected on the The following are customization features that allow you FACTORY DEFAULTS screen. to program settings to the vehicle: Press the set/reset button to scroll through the following FACTORY DEFAULTS choices: This feature allows you to set all of the customization...
  • Page 221 DELAYED LOCKING 60 seconds: The exterior lamps will stay on for 60 seconds. This feature allows the locking of the vehicle to be delayed until all of the doors have been closed for about 90 seconds: The exterior lamps will stay on for five seconds.
  • Page 222 Press the menu button until DELAYED LOCKING When ON is selected, the content theft-deterrent system appears on the DIC display. Press the set/reset button will be armed when the vehicle is locked by pressing to scroll through the following choices: the lock button on the RKE transmitter or by pressing the power door lock switch.
  • Page 223: Remote Start

    To select a setting and move on to the next feature, Press the option button until REAR PARK CHIME press the menu button while the desired setting is appears on the DIC display. Press the set/reset button displayed on the DIC. to scroll through the following choices: REMOTE START OFF: The URPA system’s chime will be disabled.
  • Page 224 AUTO DOOR UNLOCK YES: The key will be personalized. To select a setting and move on to the next feature, This feature allows automatic door unlocking to be press the menu button while the desired setting is turned off, used for the driver’s door only, or for all of displayed on the DIC.
  • Page 225 Press the menu button until AUTO UNLOCK ON ALL: All of the doors will unlock on the first press of appears on the DIC display. Press the set/reset button the unlock button on the RKE transmitter. to scroll through the following choices: To select a setting, press the menu button while the desired setting is displayed on the DIC.
  • Page 226: Audio System(S)

    Audio System(s) • Set up your audio system by presetting your favorite radio stations, setting the tone, and Determine which radio your vehicle has and then read adjusting the speakers. Then, when driving the pages following to familiarize yourself with its conditions permit, you can tune to your favorite features.
  • Page 227: Setting The Time

    Radio(s) (MP3) Your vehicle may have a feature called Retained Accessory Power (RAP). With RAP, the audio system can be played even after the ignition is turned off. See Retained Accessory Power (RAP) on page 2-33 for more information. Setting the Time Press the H or the M button to enter the clock mode.
  • Page 228: Playing The Radio

    Radio Data System (RDS) Playing the Radio The audio system has a Radio Data System (RDS). Top Knob (Power/Volume): Press to turn the system RDS features are available for use only on FM stations on and off. Turn clockwise or counterclockwise to that broadcast RDS information.
  • Page 229: Setting Preset Stations

    (maximum). Each higher setting provides more volume To scan preset stations, press and hold either arrow for compensation at faster vehicle speeds. To turn four seconds until PRESET SCAN displays. The automatic volume off, press this button until AUTO radio goes to the next preset station, plays for a VOLUME OFF displays.
  • Page 230: Adjusting The Speakers (Balance/Fade)

    Setting the Tone (Bass/Treble) To adjust the fade between the front and the rear speakers, press until FADE displays. Turn to move the sound toward the front or the rear speakers. (Bass/Treble): Press to select BASS or TREBLE. Turn to increase or to decrease. If a station is To adjust the balance and fade to the middle position, weak or has static, decrease the treble.
  • Page 231: Rds Messages

    If both category and traffic are on, the radio searches announcement. Alert announcements cannot be for stations with the selected category and traffic turned off. announcements. This function does not work with XM™. ALERT! is not affected by tests of the emergency broadcast system.
  • Page 232: Radio Messages

    The radio plays the traffic announcement even if the programming and commercial-free music, volume is low. The radio interrupts the play of a CD if coast-to-coast, and in digital-quality sound. During your the last tuned station broadcasts traffic announcements. trial or when you subscribe, you will get unlimited access to XM™...
  • Page 233 Playing a CD(s) (Six-Disc CD Player) If more than one CD has been loaded, a number for each CD displays. (Load): Press to load CDs into the CD player. This Playing a Specific Loaded CD CD player holds up to six CDs. A number displays for every CD that is loaded into the To insert one CD, do the following: player.
  • Page 234 Care of Your CD and DVD Player To eject multiple CDs, do the following: 1. Press and hold eject for two seconds. A beep Do not add any label to a CD, it could get caught in the sounds and EJECT ALL DISCS displays. CD or DVD player.
  • Page 235 RDM (Random): Press to hear the tracks in random, played. Press the right arrow to go to the next track. If rather than sequential order, on one CD or all of either arrow is held or pressed more than once, the the loaded CDs.
  • Page 236 AUTO EQ (Automatic Equalization): Press to select 4. Press and hold the button to save the track into the equalization setting while playing a CD. The memory. When song list is pressed, one beep equalization is stored while a CD is played. For more sounds.
  • Page 237: Using The Auxiliary Input Jack

    • To delete the entire song list, perform the following The air is very humid. If so, wait about an hour and steps: try again. 1. Turn the CD player on. • There may have been a problem while burning the CD.
  • Page 238: Using An Mp3

    Using an MP3 To use a portable audio player, connect a 3.5 mm (1/8 inch) cable to the radio’s front auxiliary input jack. When a device is connected, the radio displays AUX MP3 CD-R Disc INPUT DEVICE and begins playing audio from MP3 Format that device.
  • Page 239 • Empty Directory or Folder Make sure to finalize the disc when burning an MP3 disc, using multiple sessions. It is usually better to If a root directory or a folder exists somewhere in the file burn the disc all at once. structure that contains only folders/subfolders and no •...
  • Page 240 Order of Play Track names longer than 32 characters or four pages are shortened. Parts of words on the last page of Tracks are played in the following order: text and the extension of the filename does not display. • Play begins from the first track in the first playlist Preprogrammed Playlists and continues sequentially through all tracks in...
  • Page 241: Xm Radio Messages

    RDM (Random): Press to hear the tracks in random, (Information): Press to display the artist name and rather than sequential order, on one CD, one folder, album contained in the ID3 tag. or all of the loaded CDs. To use random, do one of the following: XM Radio Messages •...
  • Page 242: Navigation/Radio System

    Navigation/Radio System No Info: No artist, song title, category, or text information is available at this time on this channel. The system is working properly. Your vehicle may have a navigation radio system. The navigation system has built-in features intended to Not Found: There are no channels available for the minimize driver distraction.
  • Page 243: Before You Drive

    This button can also be used to turn the DVD player The wireless headphones have an ON/OFF switch, a power on and to automatically resume play of a disc that channel select switch, and a volume control. To use the is in the player while the ignition is on.
  • Page 244 Wired Headphones Both sets of rear seat headphones could include foam ear pads that can be replaced. There is a right and left wired headphone jack. To These foam ear pads can become worn or damaged if adjust the volume, do the following: they are not handled or stored properly.
  • Page 245: Stereo Rca Jacks

    Stereo RCA Jacks To use the auxiliary audio and video inputs, connect an external auxiliary device such as a camcorder to the RCA jacks and turn on both the auxiliary device power and the power on the front of the RSE player. If a disc is present when the RSE power is turned on, the player automatically begins playing the disc.
  • Page 246: Dvd Player

    Vehicle Speakers When the video screen is not in use, push it up into its locked position. Only one audio source can be heard through the Notice: Avoid directly touching the video screen, vehicle’s speakers at a time. as damage may occur. See “Cleaning the Video The RSE system or an auxiliary device can be heard Screen”...
  • Page 247 DVD Player Buttons or right directional arrows to increase or decrease the headphone volume. When a DVD is playing in the DVD player and the RSA system is on, the buttons are the only buttons that will work. RSA SRC (Rear Seat Audio Source): Press this button to switch between playing the AM, FM1, FM2, XM1™...
  • Page 248: Playing A Disc

    MENU (Disc): Press this button to view the main DVD Some DVDs do not allow fast forwarding or skipping of menu. The menu is different on every disc. Use the the copyright information or previews. Some DVDs up, down, right, and left arrow buttons to move begins playing after the previews have finished.
  • Page 249: Remote Control

    Remote Control Remote Control Buttons The RSE system includes a remote control (batteries may be included with the remote control). To use the remote control, aim it at the transmitter window next to the RSE faceplate and press the desired button. Direct sunlight or very bright light can affect the ability of the transmitter to receive signals from the remote control.
  • Page 250 (Menu Navigation Arrows): Press the (Previous Chapter/Track): Press this button to go navigation arrows to move through DVD menus. to the beginning of the current chapter or track. Press this button again to return to the previous chapter The up and down arrows move through MP3 folders. or track.
  • Page 251 RSE On-Screen Display (OSD) Menu (Subtitles): Press this button to display the current subtitles. Each press of this button moves the DVD To use the RSE OSD menu when using a DVD or an to the next available subtitle option (English, Spanish, auxiliary device, do the following: French, etc., if available).
  • Page 252 Tips and Troubleshooting Chart arrows and the button to navigate the screen. This menu lets you select default preferences for language Problem Recommended Action and playback settings. To exit this menu, press the No power. The ignition might not be button, or the button on the remote control, or in ACC/ACCESSORY,...
  • Page 253 Tips and Troubleshooting Chart (cont’d) Tips and Troubleshooting Chart (cont’d) Problem Recommended Action Problem Recommended Action No sound — Wireless Turn the headphones on. The picture does not fill Video mode might not be Headphones Make sure the correct the screen. There are correctly set.
  • Page 254 Tips and Troubleshooting Chart (cont’d) Tips and Troubleshooting Chart (cont’d) Problem Recommended Action Problem Recommended Action The remote control does Point the remote control The audio or video skips The DVD could be dirty not work. directly at the face of the or jumps.
  • Page 255 Tips and Troubleshooting Chart (cont’d) Tips and Troubleshooting Chart (cont’d) Problem Recommended Action Problem Recommended Action DVD System inoperable. In severe or extreme The wireless headphones Verify that the temperatures the DVD have audio distortion. headphones are facing to system might not be the front of the vehicle, operable.
  • Page 256: Dvd Display Error Messages

    DVD Display Error Messages DVD Distortion The following errors could display on the video screen. Video distortion can occur when operating cellular phones, scanners, CB radios, Global Position Systems Disc Format Error: This message displays if a disc (GPS)*, two-way radios, mobile fax, or walkie talkies. is inserted upside down, if the disc is not readable, or if It might be necessary to turn off the DVD player when the disc format is not compatible.
  • Page 257: Rear Seat Audio (Rsa)

    Rear Seat Audio (RSA) Vehicles with a rear seat audio (RSA) system allows rear seat passengers to listen to and control any of the following audio sources: AM/FM tuner, front CD player, and XM™ Satellite Radio Service (if equipped). However, the rear seat passengers can only control the sources that the front seat passengers are not listening to.
  • Page 258: Theft-Deterrent Feature

    Left Arrow – Press the left arrow while in AM/FM tuner, disables all other button operations from the remote or XM™ Satellite Radio Service to seek down. Press control and the DVD player, except for the eject button. the left arrow while sourcing the single CD player, or the Press this button again to restore operation of the six-disc CD player to go to the previous track.
  • Page 259: Audio Steering Wheel Controls

    Audio Steering Wheel Controls When a CD is playing, press either scan arrow to go to the previous or next track, if more than eight seconds have played. If either scan arrow is held or pressed more than once, the player continues moving backward or forward through the CD.
  • Page 260: Radio Reception

    Radio Reception XM™ Satellite Radio Service XM™ Satellite Radio Service gives digital radio Frequency interference and static during normal radio reception from coast-to-coast in the 48 contiguous reception can occur if items such as cellphone chargers, United States, and in Canada. Just as with FM, vehicle convenience accessories, and external tall buildings or hills can interfere with satellite radio electronic devices are plugged into the accessory power...
  • Page 261: Xm™ Satellite Radio Antenna System

    XM™ Satellite Radio Antenna Chime Level Adjustment System The radio is used to adjust the vehicle’s chime level. To change the volume level of the chime, press and The XM™ Satellite Radio antenna is located on the roof hold pushbutton 6 with the ignition on and the radio of your vehicle.
  • Page 262 NOTES 3-114...
  • Page 263: Driving Your Vehicle

    Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..4-2 Driving in Rain and on Wet Roads ....4-14 Defensive Driving ...........4-2 Before Leaving on a Long Trip .......4-15 Drunk Driving ..........4-3 Highway Hypnosis ........4-15 Control of a Vehicle ........4-4 Hill and Mountain Roads ........4-16 Braking ............4-4 Winter Driving ..........4-17...
  • Page 264: Your Driving, The Road, And Your Vehicle

    Your Driving, the Road, and CAUTION: Your Vehicle Assume that other road users (pedestrians, Defensive Driving bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what Defensive driving means “always expect the they might do and be ready. In addition: unexpected.”...
  • Page 265: Drunk Driving

    Drunk Driving Police records show that almost 40 percent of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving. In recent years, more than CAUTION: 17,000 annual motor vehicle-related deaths have been associated with the use of alcohol, with about 250,000 people injured.
  • Page 266: Control Of A Vehicle

    Control of a Vehicle 66 feet (20 m). That could be a lot of distance in an emergency, so keeping enough space between your vehicle and others is important. The following three systems help to control your vehicle while driving — brakes, steering, and accelerator. At And, of course, actual stopping distances vary greatly times, as when driving on snow or ice, it is easy to ask with the surface of the road, whether it is pavement...
  • Page 267: Antilock Brake System (Abs)

    Antilock Brake System (ABS) ABS can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can Your vehicle has the Antilock Brake System (ABS), an help you steer around the obstacle while braking hard.
  • Page 268: Braking In Emergencies

    Braking in Emergencies This warning light will come on to let you know if there is a problem with With ABS, you can steer and brake at the same time. your traction control In many emergencies, steering can help you more than system.
  • Page 269: Stabilitrak ® System

    ® StabiliTrak System To turn the system off, press the traction control ® button located on the Your vehicle may be equipped with StabiliTrak which center of the instrument combines anti-lock brake, traction and stability panel. control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
  • Page 270: Traction Control Operation

    The STABILITY CONTROL ACTIVE message will Your Vehicle to Get It Out on page 4-21 and If Your appear on the DIC only when the system is both Vehicle is Stuck in Sand, Mud, Ice, or Snow on on and activated. It means that an advanced page 4-20.
  • Page 271: Steering

    Steering Tips The traction control system may activate on dry or rough roads or under conditions such as heavy It is important to take curves at a reasonable speed. acceleration while turning or abrupt upshifts/downshifts of the transaxle. When this happens you may notice A lot of the “driver lost control”...
  • Page 272: Steering In Emergencies

    Steering in Emergencies The same thing can happen if you are steering through a sharp curve and you suddenly accelerate. Those There are times when steering can be more effective two control systems — steering and acceleration — can than braking. For example, you come over a hill and find overwhelm those places where the tires meet the a truck stopped in your lane, or a car suddenly pulls road and make you lose control.
  • Page 273: Off-Road Recovery

    Off-Road Recovery You may find that your vehicle’s right wheels have dropped off the edge of a road onto the shoulder while you are driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand.
  • Page 274: Passing

    Passing Skidding In a skid, a driver can lose control of the vehicle. Passing another vehicle on a two-lane road can be Defensive drivers avoid most skids by taking reasonable dangerous. To reduce the risk of danger while passing, care suited to existing conditions, and by not overdriving we suggest the following tips: those conditions.
  • Page 275: Driving At Night

    • While driving on a surface with reduced traction, try your Slow down and keep more space between you and best to avoid sudden steering, acceleration, or braking, other vehicles because your headlamps can only including reducing vehicle speed by shifting to a lower light up so much road ahead.
  • Page 276: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Hydroplaning Hydroplaning is dangerous. Water can build up under Rain and wet roads can reduce vehicle traction your vehicle’s tires so they actually ride on the and affect your ability to stop and accelerate. Always water.
  • Page 277: Before Leaving On A Long Trip

    Before Leaving on a Long Trip Highway Hypnosis To prepare your vehicle for a long trip, consider having Always be alert and pay attention to your surroundings it serviced by your dealer/retailer before departing. while driving. If you become tired or sleepy, find a safe place to park your vehicle and rest.
  • Page 278: Hill And Mountain Roads

    Hill and Mountain Roads CAUTION: Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: Coasting downhill in NEUTRAL (N) or with the • ignition off is dangerous. The brakes will have Keep your vehicle serviced and in good shape.
  • Page 279: Winter Driving

    Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You might want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning triangles.
  • Page 280: If You Are Caught In A Blizzard

    If your vehicle has a traction system, it will improve your bridges. Sometimes the surface of a curve or an ability to accelerate when driving on a slippery road. But overpass can remain icy when the surrounding roads you can turn the traction system off if you ever need to. are clear.
  • Page 281 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
  • Page 282: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow

    Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine CAUTION: again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible.
  • Page 283: Rocking Your Vehicle To Get It Out

    Rocking Your Vehicle to Get It Out Loading Your Vehicle First, turn the steering wheel left and right to clear It is very important to know how much weight your the area around the front wheels. Turn off any traction vehicle can carry.
  • Page 284 Tire and Loading Information Label The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 5-48 and Inflation - Tire Pressure on page 5-54.
  • Page 285 The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 −...
  • Page 286 Example 2 Example 3 Item Description Total Item Description Total Vehicle Capacity Vehicle Capacity 1,000 lbs 1,000 lbs Weight for Weight for (453 kg) (453 kg) Example 2 = Example 3 = Subtract Occupant Subtract Occupant 1,000 lbs Weight 150 lbs 750 lbs (340 kg) Weight 200 lbs (453 kg)
  • Page 287 Refer to your vehicle’s tire and loading information The label shows the gross weight capacity of your label for specific information about your vehicle’s vehicle. This is called the Gross Vehicle Weight capacity weight and seating positions. The Rating (GVWR). The GVWR includes the weight of combined weight of the driver, passengers, and the vehicle, all occupants, fuel, and cargo.
  • Page 288 Never exceed the GVWR for your vehicle or the GAWR for either the front or rear axle. CAUTION: CAUTION: Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. Do not load your vehicle any heavier than •...
  • Page 289: Towing

    Towing • How far will you tow? Some vehicles have restrictions on how far and how long they can tow. • Do you have the proper towing equipment? See your Towing Your Vehicle dealer/retailer or trailering professional for additional advice and equipment recommendations. Consult your dealer/retailer or a professional towing service if you need to have your disabled vehicle towed.
  • Page 290: Level Control

    Level Control Towing a Trailer On vehicles equipped with automatic level control, the rear of the vehicle is automatically kept level as you load CAUTION: or unload your vehicle. However, you should still not exceed the GVWR or the GAWR. See Loading Your Vehicle on page 4-21.
  • Page 291: If You Do Decide To Pull A Trailer

    If You Do Decide To Pull A Trailer Your vehicle can tow a trailer. To identify the trailering capacity of vehicle, you should read the information If you do, here are some important points: in “Weight of the Trailer” that appears later in this •...
  • Page 292: Weight Of The Trailer

    Weight of the Trailer Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all the required How heavy can a trailer safely be? trailering equipment. The weight of additional optional equipment, passengers and cargo in the tow vehicle It depends on how you plan to use your rig.
  • Page 293: Weight Of The Trailer Tongue

    Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle.
  • Page 294 Consider the following example: gear in the vehicle as well. You may add 300 lbs (136 kg) to the front axle weight and 400 lbs (181 kg) to the rear A vehicle model base weight is 5,500 lbs (2 495 kg); axle weight.
  • Page 295: Safety Chains

    It is important that you make sure your vehicle does not If you do, remember to seal the holes later when you exceed any of its ratings — GCWR, GVWR, RGAWR, remove the hitch. If you do not seal them, deadly Maximum Trailer Rating or Tongue Weight.
  • Page 296: Driving With A Trailer

    Driving with a Trailer CAUTION: (Continued) CAUTION: • If exhaust does come into your vehicle through a window in the rear or another opening, drive with your front, main If you have a rear-most window open and you heating or cooling system on and with the pull a trailer with your vehicle, carbon fan on any speed.
  • Page 297: Making Turns

    Passing Towing a trailer requires a certain amount of experience. Before setting out for the open road, you will want to You will need more passing distance up ahead when you get to know your rig. Acquaint yourself with the feel of are towing a trailer.
  • Page 298: Turn Signals When Towing A Trailer

    Turn Signals When Towing a Trailer Parking on Hills When you tow a trailer, your vehicle has to have extra wiring. CAUTION: The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, You really should not park your vehicle, with a the trailer lamps will also flash, telling other drivers you are about to turn, change lanes, or stop.
  • Page 299: Maintenance When Trailer Towing

    When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you are pulling a trailer. See the Maintenance Schedule for more 1. Apply your regular brakes and hold the pedal down on this.
  • Page 300 NOTES 4-38...
  • Page 301: Service And Appearance Care

    Section 5 Service and Appearance Care Service ............5-3 Engine Overheating ........5-24 Accessories and Modifications ......5-3 Overheated Engine Protection California Proposition 65 Warning .....5-3 Operating Mode ........5-25 California Perchlorate Materials Requirements ..5-4 Cooling System ..........5-26 Doing Your Own Service Work ......5-4 Power Steering Fluid ........5-31 Adding Equipment to the Outside of Your Windshield Washer Fluid ........5-32...
  • Page 302 Section 5 Service and Appearance Care Tire Pressure Monitor System ......5-57 Care of Safety Belts ........5-92 Tire Pressure Monitor Operation .....5-58 Weatherstrips ..........5-93 Tire Inspection and Rotation ......5-62 Washing Your Vehicle ........5-93 When It Is Time for New Tires .......5-64 Cleaning Exterior Lamps/Lenses .....5-93 Buying New Tires .........5-65 Finish Care ..........5-94...
  • Page 303: Service

    Service Accessories and Modifications When non-dealer/non-retailer accessories are added to For service and parts needs, visit your dealer/retailer. your vehicle they can affect your vehicle’s performance You will receive genuine GM parts and GM-trained and and safety, including such things as, airbags, braking, supported service people.
  • Page 304: California Perchlorate Materials Requirements

    California Perchlorate Materials If you want to do some of your own service work, you should use the proper service manual. It tells you Requirements much more about how to service your vehicle than this manual can. To order the proper service manual, see Certain types of automotive applications, such as airbag Service Publications Ordering Information on page 7-17.
  • Page 305: Fuel

    Fuel Gasoline Specifications At a minimum, gasoline should meet ASTM Use of the recommended fuel is an important part of the specification D 4814 in the United States or proper maintenance of your vehicle. To help keep the CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines engine clean and maintain optimum vehicle contain an octane-enhancing additive called performance, we recommend the use of gasoline...
  • Page 306: Additives

    Additives Some gasolines that are not reformulated for low emissions can contain an octane-enhancing additive To provide cleaner air, all gasolines in the United States called methylcyclopentadienyl manganese tricarbonyl are now required to contain additives that help prevent (MMT); ask the attendant where you buy gasoline engine and fuel system deposits from forming, allowing whether the fuel contains MMT.
  • Page 307: Fuels In Foreign Countries

    Many service stations will not have an 85% ethanol E85 has less energy per gallon than gasoline, so you fuel (E85) pump available. The U. S. Department will need to refill the fuel tank more often when using of Energy has an alternative fuels website E85 than when you are using gasoline.
  • Page 308: Filling The Tank

    Filling the Tank CAUTION: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle.
  • Page 309 The CHECK GAS CAP message will be displayed in the Driver Information Center (DIC) if the fuel cap is not CAUTION: properly installed. See DIC Warnings and Messages on page 3-54 for more information. Fuel can spray out on you if you open the fuel cap too quickly.
  • Page 310: Filling A Portable Fuel Container

    Filling a Portable Fuel Container Checking Things Under the Hood CAUTION: CAUTION: Never fill a portable fuel container while it is in your vehicle. Static electricity discharge from An electric fan under the hood can start up the container can ignite the fuel vapor. and injure you even when the engine is not You can be badly burned and your vehicle running.
  • Page 311: Hood Release

    Hood Release 4. Pull up on the hood prop to release it from its storage clip. To open the hood, do the following: The hood prop may be hot due to increased engine temperatures under the hood, so be careful when 1.
  • Page 312: Engine Compartment Overview

    Engine Compartment Overview When you open the hood on the 3.9L V6 engine, here is what you will see: 5-12...
  • Page 313: Engine Oil

    A. Underhood Fuse Block. See Underhood Fuse Block Engine Oil on page 5-102. Checking Engine Oil B. Remote Positive (+) Terminal. See Jump Starting on page 5-37. It is a good idea to check the engine oil every time you C.
  • Page 314: When To Add Engine Oil

    When to Add Engine Oil See Engine Compartment Overview on page 5-12 for the location of the engine oil fill cap. Be sure to add enough oil to put the level somewhere in the proper operating range in the cross-hatched area. If the oil is below the cross-hatched area at the tip Push the dipstick all the way back in when you are of the dipstick, add at least one quart/liter of the...
  • Page 315: What Kind Of Engine Oil To Use

    What Kind of Engine Oil to Use • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. •...
  • Page 316: Engine Oil Additives

    If you are in an area of extreme cold, where the When the system has calculated that oil life has been temperature falls below −20°F (−29°C), it is diminished, it will indicate that an oil change is recommended that you use either an SAE 5W-30 necessary.
  • Page 317: How To Reset The Engine Oil Life System

    How to Reset the Engine Oil Life What to Do with Used Oil System Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. The Engine Oil Life System calculates when to change Do not let used oil stay on your skin for very long.
  • Page 318: Engine Air Cleaner/Filter

    Engine Air Cleaner/Filter When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 50,000 mile (85 000 km) interval. See Scheduled Maintenance on page 6-4 for more information. If you are driving in dusty/dirty conditions, inspect the filter at each engine oil change.
  • Page 319 To inspect or replace the air cleaner/filter, do the following: CAUTION: 1. Remove the two clamps on the duct. 2. Remove the duct. Operating the engine with the air cleaner/filter 3. Unlatch the two hooks on top of the engine off can cause you or others to be burned.
  • Page 320: Automatic Transmission Fluid

    Automatic Transmission Fluid Notice: Too much or too little fluid can damage your transmission. Too much can mean that some of the fluid could come out and fall on hot engine When to Check and Change Automatic parts or exhaust system parts, starting a fire. Transmission Fluid Too little fluid could cause the transmission to overheat.
  • Page 321: Checking The Fluid Level

    Checking the Fluid Level How to Add Automatic Transmission Fluid Prepare your vehicle as follows: 1. Park your vehicle on a level place. Keep the engine Refer to the Maintenance Schedule to determine what running. kind of transmission fluid to use. See Recommended 2.
  • Page 322: Engine Coolant

    Engine Coolant What Engine Coolant to Use Use a mixture of one-half clean, drinkable water and The cooling system in your vehicle is filled with ® one-half DEX-COOL coolant which will not damage ® DEX-COOL engine coolant. This coolant is designed aluminum parts.
  • Page 323: Adding Coolant

    Adding Coolant If you have to add coolant more than four times a year, have your dealer/retailer check your cooling system. ® If you need more coolant, add the proper DEX-COOL Notice: If you use extra inhibitors and/or additives coolant mixture at the coolant recovery tank, but be in your vehicle’s cooling system, you could careful not to spill it.
  • Page 324: Radiator Pressure Cap

    If Steam Is Coming From Your Engine Occasionally check the coolant level in the radiator. For information on how to add coolant to the radiator, see Cooling System on page 5-26. CAUTION: Radiator Pressure Cap Steam from an overheated engine can burn Notice: The radiator cap on your vehicle is a you badly, even if you just open the hood.
  • Page 325: If No Steam Is Coming From Your Engine

    If No Steam Is Coming From Your If there is still no sign of steam, idle the engine for three minutes while you are parked. If you still have the Engine warning, turn off the engine and get everyone out of the vehicle until it cools down.
  • Page 326: Cooling System

    Cooling System CAUTION: When you decide it is safe to lift the hood, here is what you will see: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing, and tools away from any underhood electric fan.
  • Page 327 Notice: Engine damage from running your engine without coolant is not covered by your warranty. CAUTION: See Overheated Engine Protection Operating Mode on page 5-25 for information on driving to a safe place in an emergency. Heater and radiator hoses, and other engine parts, can be very hot.
  • Page 328 How to Add Coolant to the Coolant Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. Recovery Tank Use the recommended coolant and the proper coolant mixture. If you have not found a problem yet, but the coolant level is not at or above the full cold mark, add a ®...
  • Page 329: How To Add Coolant To The Radiator

    How to Add Coolant to the Radiator If the overheat warning continues, there is one more thing you can try. You can add the proper coolant Notice: Your engine has a specific radiator fill mixture directly to the radiator, but be sure the cooling procedure.
  • Page 330 CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. ® 3. Fill the radiator with the proper DEX-COOL coolant mixture, up to the base of the filler neck.
  • Page 331: Power Steering Fluid

    Power Steering Fluid How to Check Power Steering Fluid To check the power steering fluid, do the following: The power steering fluid reservoir is located toward 1. Turn the key off and let the engine compartment the rear of the engine cool down.
  • Page 332: Windshield Washer Fluid

    Windshield Washer Fluid Notice: • When using concentrated washer fluid, What Washer Fluid to Use follow the manufacturer’s instructions for adding water. When you need windshield washer fluid, be sure to read • Do not mix water with ready-to-use washer fluid. the manufacturer’s instructions before use.
  • Page 333: Brakes

    Brakes It is not a good idea to top off the brake fluid. Adding brake fluid will not correct a leak. If fluid is added when the linings are worn, there will be too much fluid Brake Fluid when new brake linings are installed. Add or remove brake fluid, as necessary, only when work is done on the The brake master cylinder brake hydraulic system.
  • Page 334 What to Add Notice: • Using the wrong fluid can badly damage brake When you need brake fluid, use only DOT-3 brake fluid. hydraulic system parts. For example, just a Use new brake fluid from a sealed container only. few drops of mineral-based oil, such as engine See Recommended Fluids and Lubricants on page 6-12.
  • Page 335: Brake Adjustment

    Brake Wear Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly Your vehicle has disc brakes. Disc brake pads have applied. This does not mean something is wrong with built-in wear indicators that make a high-pitched warning the brakes.
  • Page 336: Battery

    Replacing Brake System Parts Warning: Battery posts, terminals, and related accessories contain lead and lead compounds, The braking system on a vehicle is complex. Its many chemicals known to the State of California to cause parts have to be of top quality and work well together if cancer and reproductive harm.
  • Page 337: Jump Starting

    Jump Starting Notice: Ignoring these steps could result in costly damage to your vehicle that would not be covered by your warranty. If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start Trying to start your vehicle by pushing or pulling it your vehicle.
  • Page 338 Notice: If you leave your radio or other accessories The terminal is located on during the jump starting procedure, they could under the fuse block cover. be damaged. The repairs would not be covered Remove the cover to by your warranty. Always turn off your radio and access the remote other accessories when jump starting your vehicle.
  • Page 339 CAUTION: CAUTION: Using a match near a battery can cause battery Fans or other moving engine parts can injure gas to explode. People have been hurt doing you badly. Keep your hands away from moving this, and some have been blinded. Use a parts once the engine is running.
  • Page 340 7. Do not let the other end touch metal. Connect it Notice: If the jumper cables are connected or to the positive (+) terminal of the good battery. removed in the wrong order, electrical shorting may Use a remote positive (+) terminal if the vehicle occur and damage the vehicle.
  • Page 341: Headlamp Aiming

    Headlamp Aiming To disconnect the jumper cables from both vehicles, do the following: Headlamp aim has been preset at the factory and 1. Disconnect the black negative (−) cable from the should need no further adjustment. vehicle that had the dead battery. However, if your vehicle is damaged in a crash, 2.
  • Page 342: Bulb Replacement

    Bulb Replacement Headlamps and Sidemarker Lamps For the proper type of replacement bulbs, see Replacement Bulbs on page 5-46. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside A.
  • Page 343 To replace one of these bulbs: 4. Pull the assembly away from the vehicle. 1. Open the hood. See Hood Release on page 5-11 5. Disconnect the socket wiring harness connector for more information. from the headlamp assembly. 6. Turn the bulb socket counterclockwise to remove from the assembly.
  • Page 344: Front Turn Signal, Parking And Daytime Running Lamps (Drl)

    Front Turn Signal, Parking and Taillamps, Turn Signal, Stoplamps Daytime Running Lamps (DRL) and Back-up Lamps To change a stoplamp/taillamp, turn signal or back-up lamp bulb: 1. Open the liftgate. See Liftgate on page 2-22 for more information. 2. Remove the two screws from the taillamp housing on the inboard side.
  • Page 345 5. Turn the bulb socket counterclockwise to remove. 6. Replace the bulb by pulling the old bulb out of the socket and gently pushing in a new bulb. 7. Replace the bulb socket by inserting and turning clockwise to secure. 8.
  • Page 346: License Plate Lamp

    License Plate Lamp Replacement Bulbs To replace one of these bulbs: Exterior Lamp Bulb Number 1. Remove the two screws holding each of the license Back-Up Lamp 3057KX plate lamps to the fascia. Front Turn Signal, DRL and 3157NAK Parking Lamp High-Beam and Low-Beam Headlamps License Plate Lamp...
  • Page 347: Windshield Wiper Blade Replacement

    Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 6-14.
  • Page 348: Tires

    Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever • Underinflated tires pose the same have questions about your tire warranty and where danger as overloaded tires. The to obtain service, see your vehicle Warranty resulting accident could cause serious booklet for details.
  • Page 349: Tire Sidewall Labeling

    Tire Sidewall Labeling (A) Tire Size The tire size is a combination of letters and numbers used to define a particular Useful information about a tire is molded into its tire’s width, height, aspect ratio, construction type, sidewall. The examples below show a typical and service description.
  • Page 350 (F) Uniform Tire Quality Grading (UTQG) (A) Temporary Use Only The compact spare Tire manufacturers are required to grade tire or temporary use tire has a tread life of tires based on three performance factors: approximately 3,000 miles (5 000 km) and should treadwear, traction, and temperature resistance.
  • Page 351 (F) Tire Size A combination of letters and (B) Tire Width The three-digit number indicates numbers define a tire’s width, height, aspect ratio, the tire section width in millimeters from sidewall construction type, and service description. to sidewall. The letter T as the first character in the tire size (C) Aspect Ratio A two-digit number that means the tire is for temporary use only.
  • Page 352: Tire Terminology And Definitions

    Tire Terminology and Definitions Curb Weight The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, Air Pressure The amount of air inside the but without passengers and cargo. tire pressing outward on each square inch of the tire.
  • Page 353 Load Index An assigned number ranging from Passenger (P-Metric) Tire A tire used on 1 to 279 that corresponds to the load carrying passenger cars and some light duty trucks and capacity of a tire. multipurpose vehicles. Maximum Inflation Pressure The maximum air Recommended Inflation Pressure Vehicle...
  • Page 354: Inflation - Tire Pressure

    Inflation - Tire Pressure Treadwear Indicators Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread Tires need the correct amount of air pressure to remains. See When It Is Time for New Tires on operate effectively.
  • Page 355 How to Check A vehicle specific Tire and Loading Information label is attached to your vehicle. This label shows Use a good quality pocket-type gage to check your vehicle’s original equipment tires and the tire pressure. You cannot tell if your tires are correct inflation pressures for your tires when they properly inflated simply by looking at them.
  • Page 356: High-Speed Operation

    High-Speed Operation If your vehicle has P225/60R17 size tires, they will require inflation pressure adjustment when driving your vehicle at speeds of 100 mph (160 km/h) or higher. Set the cold inflation pressure to the maximum inflation CAUTION: pressure shown on the tire sidewall, or 38 psi (262 kPa), whichever is lower.
  • Page 357: Tire Pressure Monitor System

    Tire Pressure Monitor System Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to The Tire Pressure Monitor System (TPMS) uses radio maintain correct tire pressure, even if under-inflation and sensor technology to check tire pressure levels. has not reached the level to trigger illumination of The TPMS sensors monitor the air pressure in your the TPMS low tire pressure telltale.
  • Page 358: Tire Pressure Monitor Operation

    Federal Communications Commission Tire Pressure Monitor Operation (FCC) and Industry and Science The Tire Pressure Monitor System (TPMS) is designed Canada to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire The Tire Pressure Monitor System (TPMS) operates on and wheel assembly, excluding the spare tire and wheel a radio frequency and complies with Part 15 of the assembly.
  • Page 359 At the same time a message to check the pressure in a A Tire and Loading Information label, attached to your specific tire appears on the Driver Information Center vehicle, shows the size of your vehicle’s original (DIC) display. The low tire pressure warning light equipment tires and the correct inflation pressure for and the DIC warning message come on at each ignition your vehicle’s tires when they are cold.
  • Page 360: Tpms Malfunction Light And Message

    TPMS Malfunction Light and Message • One or more TPMS sensors are missing or damaged. The DIC message and the TPMS The TPMS will not function properly if one or more of the malfunction light should go off when the TPMS TPMS sensors are missing or inoperable.
  • Page 361: Tpms Sensor Matching Process

    TPMS Sensor Matching Process You will have two minutes to match the first tire/wheel position, and five minutes overall to match all four Each TPMS sensor has a unique identification code. tire/wheel positions. If it takes longer than two minutes, Any time you rotate your vehicle’s tires or replace one or to match the first tire and wheel, or more than more of the TPMS sensors, the identification codes...
  • Page 362: Tire Inspection And Rotation

    Tire Inspection and Rotation 6. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire’s air pressure for five seconds, We recommend that you regularly inspect your or until a horn chirp sounds. The horn chirp, vehicle’s tires, including the spare tire, for signs of which may take up to 30 seconds to sound, wear or damage.
  • Page 363 Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications on page 5-105. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
  • Page 364: When It Is Time For New Tires

    When It Is Time for New Tires • The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. Various factors, such as maintenance, temperatures, • The tire has a bump, bulge, or split. driving speeds, vehicle loading, and road conditions influence when you need new tires.
  • Page 365: Buying New Tires

    Buying New Tires GM recommends replacing tires in sets of four. This is because uniform tread depth on all tires will help keep your vehicle performing most like it did when the GM has developed and matched specific tires for your tires were new.
  • Page 366: Different Size Tires And Wheels

    Different Size Tires and Wheels CAUTION: If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its If you use bias-ply tires on your vehicle, braking, ride and handling characteristics, stability, and the wheel rim flanges could develop resistance to rollover.
  • Page 367: Uniform Tire Quality Grading

    Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating Quality grades can be found where applicable on based on the wear rate of the tire when tested the tire sidewall between tread shoulder and under controlled conditions on a specified maximum section width.
  • Page 368: Wheel Alignment And Tire Balance

    Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, The tires and wheels on your vehicle were aligned and C, representing the tire’s resistance to the and balanced carefully at the factory to give you generation of heat and its ability to dissipate heat the longest tire life and best overall performance.
  • Page 369: Used Replacement Wheels

    Each new wheel should have the same load-carrying Notice: The wrong wheel can also cause problems capacity, diameter, width, offset, and be mounted with bearing life, brake cooling, speedometer or the same way as the one it replaces. odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain If you need to replace any of your wheels, wheel bolts, clearance to the body and chassis.
  • Page 370: Tire Chains

    Tire Chains Accessory Inflator Your vehicle may have an accessory inflator. With it, you can inflate things like air mattresses and basketballs, and CAUTION: you can also use it to bring your tires up to the proper pressure. Do not use tire chains. There is not enough The accessory inflator is located in the rear clearance.
  • Page 371 There may be an accessory inflator kit stored in the rear If the accessory inflator system does not turn on or the compartment on the passenger’s side. It includes a light does not come on, the fuse may be blown or 20-foot (6 m) hose with an air pressure gage and nozzle installed incorrectly.
  • Page 372: If A Tire Goes Flat

    If a Tire Goes Flat CAUTION: It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out Lifting a vehicle and getting under it to do slowly.
  • Page 373: Changing A Flat Tire

    Changing a Flat Tire When your vehicle has a flat tire, use the following example as a guide to assist you in the placement of If a tire goes flat, avoid further tire and wheel damage wheel blocks. by driving slowly to a level place. Turn on your vehicle’s hazard warning flashers.
  • Page 374: Removing The Spare Tire And Tools

    Removing the Spare Tire and Tools To remove the tools: 1. Open the liftgate. See Liftgate on page 2-22 for more information. 2. Remove the convenience net, if the vehicle has one. 3. Open the jack storage compartment by lifting the tab and pulling the cover off.
  • Page 375 5. Separate the plastic pouch from the jack and To remove the compact spare tire: remove the jacking tools, including the folding wrench and extension, from the pouch. A. Hoist Shaft D. Compact Spare Tire B. Hoist Assembly E. Extension (Chisel End) C.
  • Page 376: Removing The Flat Tire And Installing The Spare Tire

    Removing the Flat Tire and Installing the Spare Tire Your vehicle may have aluminum wheels. If so, you will see exposed stainless steel wheel nuts. Use the wheel wrench to loosen all of the wheel nuts. Do not remove them yet. Your vehicle may have steel wheel covers.
  • Page 377 Store the wheel cover securely in the rear of the 2. Loosen the wheel nuts vehicle until you have the flat tire repaired or replaced. using the folding Once the wheel cover has been removed, use the wrench, but do not following procedure to remove the flat tire and install remove them.
  • Page 378 Notice: If a jack is used to raise the vehicle without positioning it correctly, your vehicle could be damaged. When raising your vehicle on a jack, avoid contact with the rear axle control arms. Notice: If you position the jack under the rocker molding and attempt to raise the vehicle, you could break the molding and/or cause other damage to your vehicle.
  • Page 379 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly 5.
  • Page 380 CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
  • Page 381 9. Install the compact spare tire and put the CAUTION: wheel nuts back on with the rounded end of the nuts toward Never use oil or grease on studs or nuts. the wheel. Because the nuts might come loose. The vehicle’s wheel could fall off, causing a crash.
  • Page 382 CAUTION: Incorrect or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to a crash. If you have to replace them, be sure to get new original equipment wheel nuts. Stop somewhere as soon as you can and have the nuts tightened with a torque wrench to the proper torque specification.
  • Page 383: Secondary Latch System

    Secondary Latch System 11. Tighten the wheel nuts firmly in a crisscross sequence, as shown. Your vehicle may have an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop a tire from suddenly falling off your vehicle if the cable holding the spare tire is damaged.
  • Page 384 To release the spare tire from the secondary latch: CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out from the under spare.
  • Page 385 2. Turn the folding wrench clockwise to raise the jack until it lifts the secondary latch device under the wheel plate. 3. Keep raising the jack until the compact spare tire stops moving upward and is held firmly in place. This lets you know that the secondary latch has released.
  • Page 386: Storing A Flat Or Spare Tire And Tools

    Storing a Flat or Spare Tire Storing the Flat or Spare Tire and Tools CAUTION: CAUTION: The underbody-mounted spare tire needs to be stored with the valve stem pointing down. Storing a jack, a tire, or other equipment in the If the spare tire is stored with the valve stem passenger compartment of the vehicle could pointing upwards, its secondary latch will not...
  • Page 387 To store the spare tire: 1. Lay the tire near the rear of the vehicle with the valve stem down. 2. Remove the small center cap by tapping the back of the cap with the extension of the shaft, if the vehicle has aluminum wheels.
  • Page 388 Storing the Tools Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on. To replace the cover, line up the tabs on the right of the cover with the slots in the cover opening. Push the cover in place and push down the tab so that it rests in the groove.
  • Page 389: Compact Spare Tire

    Compact Spare Tire Notice: When the compact spare is installed, do not take your vehicle through an automatic car wash with guide rails. The compact spare can Although the compact spare tire was fully inflated when get caught on the rails. That can damage the tire and the vehicle was new, it can lose air after a time.
  • Page 390: Appearance Care

    Appearance Care Notice: If you use abrasive cleaners when cleaning glass surfaces on your vehicle, you could scratch the glass and/or cause damage to the rear window Interior Cleaning defogger. When cleaning the glass on your vehicle, use only a soft cloth and glass cleaner. Your vehicle’s interior will continue to look its best if it is Many cleaners contain solvents that may become cleaned often.
  • Page 391: Fabric/Carpet

    • To clean, use the following instructions: Use only mild, neutral-pH soaps. Avoid laundry detergents or dishwashing soaps with degreasers. 1. Saturate a lint-free, clean white cloth with water or Using too much soap will leave a residue that club soda. leaves streaks and attracts dirt.
  • Page 392: Leather

    Leather permanently change the appearance and feel of your interior and are not recommended. Do not use silicone A soft cloth dampened with water can be used to or wax-based products, or those containing organic remove dust. If a more thorough cleaning is necessary, solvents to clean your vehicle’s interior because a soft cloth dampened with a mild soap solution can they can alter the appearance by increasing the gloss in...
  • Page 393: Weatherstrips

    Weatherstrips Care/Appearance Materials on page 5-97. Follow all manufacturers’ directions regarding correct product usage, necessary safety precautions and appropriate Silicone grease on weatherstrips will make them last disposal of any vehicle care product. longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth.
  • Page 394: Finish Care

    Finish Care Exterior painted surfaces are subject to aging, weather and chemical fallout that can take their toll over a Occasional waxing or mild polishing of your vehicle by period of years. You can help to keep the paint finish hand may be necessary to remove residue from the looking new by keeping your vehicle garaged or covered paint finish.
  • Page 395: Aluminum Wheels

    clean the blades. Bugs, road grime, sap and a buildup Notice: Using chrome polish on aluminum wheels of vehicle wash/wax treatments may cause wiper could damage the wheels. The repairs would not streaking. Replace the wiper blades if they are worn or be covered by your warranty.
  • Page 396: Tires

    Tires Underbody Maintenance To clean the tires, use a stiff brush with tire cleaner. Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not Notice: Using petroleum-based tire dressing removed, corrosion and rust can develop on the products on your vehicle may damage the paint underbody parts such as fuel lines, frame, floor pan, finish and/or tires.
  • Page 397: Vehicle Care/Appearance Materials

    Vehicle Care/Appearance Materials Description Usage Removes swirl marks, fine Swirl Remover Polish scratches, and other light Description Usage surface contamination. Interior and exterior Polishing Cloth polishing cloth. Removes light scratches Cleaner Wax and protects finish. Tar and Road Oil Removes tar, road oil, Cleans, shines, and Remover and asphalt.
  • Page 398: Vehicle Identification

    Vehicle Identification Engine Identification The eighth character in the VIN is the engine code. This code helps you identify your vehicle’s engine, Vehicle Identification Number (VIN) specifications, and replacement parts. Service Parts Identification Label This label is on the inside of the glove box. It is very helpful if you ever need to order parts.
  • Page 399: Electrical System

    Electrical System Windshield Wiper Fuses The windshield wiper motor is protected by an internal Add-On Electrical Equipment fuse in the underhood fuse block. If the motor overheats due to heavy snow, etc., the wiper will stop until the Notice: Do not add anything electrical to your motor cools.
  • Page 400: Fuses And Circuit Breakers

    Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse.
  • Page 401 Fuses Usage Fuses Usage Trunk, Door Locks Canister Vent Solenoid Electronic Level Control Park Lamps Rear Wiper Power Sliding Door Radio, DVD Player Blank Interior Lamps Blank ® OnStar Left Power Sliding Door Keyless Entry Module Right Power Sliding Door Cluster, Heating, Ventilation, Air Conditioning Relays...
  • Page 402: Underhood Fuse Block

    Underhood Fuse Block The underhood fuse block is located in the engine compartment. For more information on location see Engine Compartment Overview on page 5-12. Notice: Spilling liquid on any electrical components on your vehicle may damage it. Always keep the covers on any electrical component.
  • Page 403 Fuses Usage Fuses Usage Right High-Beam Antilock Brake System Fuel Pump Powertrain Control Module Ignition Diode Electronic Ignition BLANK Not Used Fuel Injector BLANK Not Used Climate Control, RPA, Cruise Control Left High-Beam Electronic Throttle Control BLANK Not Used Engine Sensor, Evaporator BLANK Not Used Airbag...
  • Page 404 J-Case Fuses Usage Relays Usage Fuse Puller RUN RLY Starter Fan 1 LO BEAM Low-Beam Starter Solenoid FUEL PUMP Fuel Pump Antilock Brake System Motor HORN Horn Blank AC/CLTCH Air Conditioning Clutch Fan 2 HI BEAM High-Beam Front Blower High PWR/TRN Powertrain Battery Main 3...
  • Page 405: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in English and metric measurements. See Recommended Fluids and Lubricants on page 6-12 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge Air Conditioning Refrigerant R134a amount, see the refrigerant caution label located under the hood.
  • Page 406 NOTES 5-106...
  • Page 407 Section 6 Maintenance Schedule Maintenance Schedule ........6-2 Owner Checks and Services ......6-8 Introduction ...........6-2 At Each Fuel Fill ..........6-9 Maintenance Requirements ......6-2 At Least Once a Month ........6-9 Your Vehicle and the Environment ....6-2 At Least Once a Year ........6-10 Using the Maintenance Schedule ......6-2 Recommended Fluids and Lubricants ....6-12 Scheduled Maintenance ........6-4...
  • Page 408: Maintenance Schedule

    Maintenance Schedule Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your Introduction vehicle in good working condition, but also helps the environment. All recommended maintenance is Important: Keep engine oil at the proper level and important.
  • Page 409 This schedule is for vehicles that: Some maintenance services can be complex. So, unless you are technically qualified and have the • carry passengers and cargo within recommended necessary equipment, you should have your limits. You will find these limits on the Tire and dealer/retailer do these jobs.
  • Page 410: Scheduled Maintenance

    Scheduled Maintenance When the CHANGE OIL SOON message appears, certain services, checks, and inspections are required. Required services are described in the following for When the CHANGE OIL SOON message comes on, it “Maintenance I” and “Maintenance II.” Generally, means that service is required for your vehicle. Have it is recommended that your first service be your vehicle serviced as soon as possible within the next Maintenance I, your second service be Maintenance II,...
  • Page 411 Scheduled Maintenance (cont’d) Service Maintenance I Maintenance II Inspect engine air cleaner filter. If necessary, replace filter. See Engine Air • Cleaner/Filter on page 5-18. See footnote (g). Rotate tires and check inflation pressures and wear. See Tire Inspection and •...
  • Page 412: Additional Required Services

    Additional Required Services The following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000)
  • Page 413: Maintenance Footnotes

    Maintenance Footnotes (d) Inspect wiper blades for wear, cracking, or contamination. Clean the windshield and wiper blades, if contaminated. Replace wiper blades that are worn or # Lubricate the suspension, steering linkage, and the damaged. See Windshield Wiper Blade Replacement on underbody contact points and linkage.
  • Page 414: Owner Checks And Services

    (h) Change automatic transmission fluid and filter if the (k) A fluid loss in any vehicle system could indicate a vehicle is mainly driven under one or more of these problem. Have the system inspected and repaired conditions: and the fluid level checked. Add fluid if needed. −...
  • Page 415: At Each Fuel Fill

    At Each Fuel Fill At Least Once a Month It is important to perform these underhood checks at Tire Inflation Check each fuel fill. Inspect your vehicle’s tires and make sure they are Engine Oil Level Check inflated to the correct pressures. Do not forget to check the spare tire.
  • Page 416: At Least Once A Year

    At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle vehicle could move suddenly. If the vehicle moves, you or others could be injured.
  • Page 417: Ignition Transmission Lock Check

    Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition to LOCK/OFF in each shift lever position. •...
  • Page 418: Recommended Fluids And Lubricants

    Recommended Fluids and Usage Fluid/Lubricant Lubricants Windshield ® Optikleen Washer Solvent. Washer Fluids and lubricants identified below by name, part GM Power Steering Fluid number, or specification can be obtained from your Power Steering (GM Part No. U.S. 89021184, in dealer/retailer.
  • Page 419 Usage Fluid/Lubricant Usage Fluid/Lubricant Hood Latch Lubriplate Lubricant Aerosol Assembly, Lubriplate Lubricant Aerosol (GM Part No. U.S. 12346293, in Sliding Door Secondary (GM Part No. U.S. 12346293, in Canada 992723) or lubricant Track Latch, Pivots, Canada 992723) or lubricant meeting requirements of NLGI #2, Spring meeting requirements of NLGI #2, Category LB or GC-LB.
  • Page 420: Normal Maintenance Replacement Parts

    Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer/retailer. ® Part GM Part Number ACDelco Part Number Engine Air Cleaner/Filter 10354942 A2939C Engine Oil Filter 89017342 PF61 Spark Plugs 12591131 41-100 Windshield Wiper Blades...
  • Page 421: Engine Drive Belt Routing

    Engine Drive Belt Routing 3.9L V6 Engine and 3.9L V6 Flexible Fuel 6-15...
  • Page 422: Maintenance Record

    Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additional information from Owner Checks and Services on page 6-8 can be added on the following record pages. You should retain all maintenance receipts.
  • Page 423 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-17...
  • Page 424 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-18...
  • Page 425: Customer Assistance Information

    Section 7 Customer Assistance Information Customer Assistance and Information ....7-2 Reporting Safety Defects ........7-16 Customer Satisfaction Procedure ......7-2 Reporting Safety Defects to the United Online Owner Center ........7-5 States Government ........7-16 Customer Assistance for Text Telephone Reporting Safety Defects to the Canadian (TTY) Users ..........7-6 Government ..........7-16 Customer Assistance Offices ......7-6...
  • Page 426: Customer Assistance And Information

    Your satisfaction and goodwill are important to your 1-800-263-7854 (French). dealer and to Pontiac. Normally, any concerns with the We encourage you to call the toll-free number in order to sales transaction or the operation of your vehicle will be give your inquiry prompt attention.
  • Page 427 STEP THREE — U.S. Owners: Both General Motors You can contact the BBB Auto Line Program using the and your dealer are committed to making sure you are toll-free telephone number or write them at the following completely satisfied with your new vehicle. However, if address: you continue to remain unsatisfied after following the BBB Auto Line Program...
  • Page 428 STEP THREE — Canadian Owners: In the event that For further information concerning eligibility in the you do not feel your concerns have been addressed Canadian Motor Vehicle Arbitration Plan (CAMVAP), call after following the procedure outlined in Steps One and toll-free 1-800-207-0685.
  • Page 429: Online Owner Center

    Online Owner Center My GM Canada (Canada only) My GM Canada is a password-protected section of Online Owner Center gmcanada.com where you can save information on GM (United States only) vehicles, get personalized offers, and use handy tools and forms with greater ease. The Owner Center is a resource for your GM ownership Here are a few of the valuable tools and services you needs.
  • Page 430: Customer Assistance For Text Telephone (Tty) Users

    Fax Number: 313-381-0022 Pontiac encourages customers to call the toll-free Canada — Customer Assistance number for assistance. However, if a customer wishes to write or e-mail Pontiac, the letter should be General Motors of Canada Limited addressed to: Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive United States —...
  • Page 431: Gm Mobility Reimbursement Program

    Overseas — Customer Assistance GM Mobility Reimbursement Program Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma #2740 Col.
  • Page 432: Roadside Assistance Program

    Service is available 24 hours a day, 365 days a year. vehicle to get to the nearest service station (approximately $5 in Canada). In Canada, service As the owner of a new Pontiac vehicle, you are to provide diesel may be restricted. For safety automatically enrolled in the Pontiac Roadside reasons, propane and other alternative fuels will not Assistance program.
  • Page 433 Pontiac and General Motors of Canada Limited reserve the right to limit services or reimbursement to an owner or driver when, in their sole discretion, the claims...
  • Page 434: Calling For Assistance

    Roadside Assistance is not part of or included in the coverage provided by the New Vehicle Limited Warranty. • Model, year, color, and license plate number of the Pontiac and General Motors of Canada Limited vehicle reserve the right to make any changes or discontinue •...
  • Page 435: Scheduling Service Appointments

    Scheduling Service Appointments Several courtesy transportation options are available to assist in reducing your inconvenience when warranty repairs are required. When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. Courtesy Transportation is not a part of the New Vehicle By scheduling a service appointment and advising your Limited Warranty.
  • Page 436: Collision Damage Repair

    Public Transportation or Fuel You are responsible for fuel usage charges and may also be responsible for taxes, levies, usage fees, Reimbursement excessive mileage, or rental usage beyond the If your vehicle requires overnight warranty repairs, and completion of the repair. public transportation is used instead of the dealer’s It may not be possible to provide a like-vehicle as a shuttle service, the expense must be supported...
  • Page 437: Repair Facility

    Collision Parts Aftermarket collision parts are also available. These are made by companies other than GM and may not Genuine GM Collision parts are new parts made with have been tested for your vehicle. As a result, these the same materials and construction methods as parts may fit poorly, exhibit premature the parts with which your vehicle was originally built.
  • Page 438: Insuring Your Vehicle

    Insuring Your Vehicle If a Crash Occurs Protect your investment in your GM vehicle with Here is what to do if you are involved in a crash. comprehensive and collision insurance coverage. There • Try to relax and then check to make sure you are are significant differences in the quality of coverage all right.
  • Page 439 • • Remove any valuables from your vehicle before it is Once you have an estimate, read it carefully and towed away. Make sure this includes your insurance make sure you understand what work will be information and registration if you keep these performed on your vehicle.
  • Page 440: Reporting Safety Defects

    If another party’s insurance company is paying for the To contact NHTSA, call the Vehicle Safety Hotline repairs, you are not obligated to accept a repair toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); valuation based on that insurance company’s collision go to http://www.safercar.gov; or write to: policy repair limits, as you have no contractual limits with Administrator, NHTSA that company.
  • Page 441: Reporting Safety Defects To General Motors

    General Motors. Service Manuals have the diagnosis and repair Call 1-800-762-2737, or write: information on engines, transmission, axle suspension, Pontiac Customer Assistance Center brakes, electrical, steering, body, etc. P.O. Box 33172 Service Bulletins Detroit, MI 48232-5172 In Canada, call 1-800-263-3777 (English) or Service Bulletins’...
  • Page 442: Owner Information

    Owner Information ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Owner publications are written specifically for owners Eastern Time and intended to provide basic operational information about the vehicle. The owner manual includes the For Credit Card Orders Only Maintenance Schedule for all models.
  • Page 443: Vehicle Data Recording And Privacy

    Vehicle Data Recording and Event Data Recorders Privacy This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or Your GM vehicle has a number of sophisticated near crash-like situations, such as an air bag computers that record information about the vehicle’s deployment or hitting a road obstacle, data that will performance and how it is driven.
  • Page 444: Onstar

    ® OnStar This data can help provide a better understanding of the circumstances in which crashes and injuries occur. ® If your vehicle has OnStar and you subscribe to the Important: EDR data is recorded by your vehicle only ® ®...
  • Page 445 Appearance Care Aluminum Wheels ........5-95 Care of Safety Belts ........5-92 Accessories and Modifications ......5-3 Chemical Paint Spotting ....... 5-96 Adding Equipment to Your Airbag-Equipped Cleaning Exterior Lamps/Lenses ....5-93 Vehicle ............1-78 Fabric/Carpet ..........5-91 Additives, Fuel ..........5-6 Finish Care ..........
  • Page 446 Audio System (cont.) Bulb Replacement (cont.) Setting the Time .......... 3-79 License Plate Lamps ........5-46 Theft-Deterrent Feature ....... 3-110 Replacement Bulbs ........5-46 XM™ Satellite Radio Antenna System ... 3-113 Taillamps, Turn Signal, Stoplamps and Audio System(s) ..........3-79 Back-up Lamps ........
  • Page 447 Child Restraints Climate Control System ........3-23 Child Restraint Systems ....... 1-48 Air Filter, Passenger Compartment ....3-30 Infants and Young Children ......1-45 Dual ............3-26 Lower Anchors and Tethers for Children ..1-52 Outlet Adjustment ........3-28 Older Children ..........1-42 Rear ............
  • Page 448 Customer Assistance Information (cont.) Door (cont.) GM Mobility Reimbursement Program ....7-7 Power Sliding Door ........2-16 Reporting Safety Defects to Programmable Automatic Door Unlock .... 2-13 General Motors ........7-17 Driver Information Center (DIC) ......3-47 Reporting Safety Defects to the DIC Operation and Displays ......
  • Page 449 Electrical System (cont.) Instrument Panel Fuse Block ....... 5-100 Filter Power Windows and Other Power Options ..5-99 Engine Air Cleaner ........5-18 Underhood Fuse Block ....... 5-102 Finish Damage ..........5-96 Windshield Wiper Fuses ....... 5-99 Fixed Mast Antenna ........3-112 Engine Flashers, Hazard Warning ........
  • Page 450 Fuel (cont.) Fuels in Foreign Countries ......5-7 Hazard Warning Flashers ........3-6 Gage ............3-46 Head Restraints ..........1-6 Gasoline Octane ........... 5-5 Headlamp Gasoline Specifications ........5-5 Aiming ............5-41 Low Warning Light ........3-47 Headlamp Wiring ..........5-99 Fuses Headlamps Fuses and Circuit Breakers ......
  • Page 451 Hood Checking Things Under ........ 5-10 Labeling, Tire Sidewall ........5-49 Release ............. 5-11 Lamps Horn ............... 3-6 Cargo ............3-19 How to Wear Safety Belts Properly ....1-27 Dome ............3-17 Front Reading ..........3-18 Rear Reading ..........3-19 Lap-Shoulder Belt ...........
  • Page 452 Light (cont.) TCS Warning Light ........3-40 Maintenance Schedule Tire Pressure ..........3-41 Additional Required Services ......6-6 Traction Control System (TCS) Warning ..3-40 At Each Fuel Fill ........... 6-9 Lighting At Least Once a Month ........6-9 Delayed ............. 3-18 At Least Once a Year ........
  • Page 453 Mirrors (cont.) OnStar, Privacy ..........7-20 ® ® Outside Heated Mirrors ........ 2-44 OnStar System, see OnStar Manual ....2-47 Outside Power Mirrors ........2-43 Operation, Universal Home Remote System ..2-50 MP3 ............. 3-90 Other Warning Devices ........3-6 MyGMLink.com ..........
  • Page 454 Parking Assist ............2-44 Radiator Pressure Cap ........5-24 Over Things That Burn ......... 2-41 Radio Frequency Identification (RFID), Privacy ..7-20 Passenger Airbag Status Indicator ..... 3-37 Radios ............3-78 Passenger Compartment Air Filter ..... 3-30 Radio(s) ............3-79 Passenger Sensing System ......
  • Page 455 Removing the Flat Tire and Installing Safety Belts (cont.) the Spare Tire ..........5-76 Lap-Shoulder Belt ........1-35 Removing the Spare Tire and Tools ....5-74 Safety Belt Extender ........1-41 Replacement Bulbs ......... 5-46 Safety Belt Use During Pregnancy ....1-41 Reporting Safety Defects Safety Belts Are for Everyone .......
  • Page 456 Service (cont.) Storage Areas (cont.) California Proposition 65 Warning ....5-3 Cupholder(s) ..........2-55 Doing Your Own Work ........5-4 Floor Console Storage Area ......2-57 Engine Soon Light ........3-42 Folding Tray ..........2-57 Publications Ordering Information ....7-17 Glove Box ..........
  • Page 457 Tire Tires (cont.) Pressure Light ..........3-41 Wheel Replacement ........5-68 Tires ............. 5-48 When It Is Time for New Tires ...... 5-64 Aluminum Wheels, Cleaning ......5-95 Towing Buying New Tires ........5-65 Recreational Vehicle ........4-27 Chains ............5-70 Towing a Trailer ..........
  • Page 458 Wheels (cont.) Replacement ..........5-68 Vehicle Where to Put the Restraint ....... 1-50 Control ............4-4 Windows ............2-24 Damage Warnings ........... iv Manual Rear Quarter ........2-26 Loading ............4-21 Power ............2-25 Symbols ............iv Power Rear Quarter ........2-26 Vehicle Data Recording and Privacy ....

This manual is also suitable for:

2008 montana sv6

Table of Contents

Save PDF