Windshield Wipers; Windshield Washer - Pontiac Montana SV6 2007 Owner's Manual

Windshield Wipers

You control the windshield wipers by turning the
band with the wiper symbol on it.
(Mist): For a single wiping cycle, turn the
8
band to mist. Hold it there until the wipers start.
Then let go. The wipers will stop after one wipe.
If you want more wipes, hold the band on mist
longer.
(Off): To stop the wipers, move the band to off.
9
(Delay): You can set the wiper speed for a long
N
or short delay between wipes. This can be very
useful in light rain or snow. Turn the band to choose
the delay time. The closer to the top of the lever, the
shorter the delay.
(Low Speed): For steady wiping at low
6
speed, turn the band away from you to the first
solid band past the delay settings. For high-speed
wiping, turn the band further, to the second solid
band past the delay settings. To stop the wipers,
move the band to off.
182
(High Speed): For high-speed wiping, turn
1
the band further, to the second solid band past the
delay settings.
Be sure to clear ice and snow from the wiper
blades before using them. If they are frozen to
the windshield, carefully loosen or thaw them. If
your blades do become worn or damaged, get new
blades or blade inserts.

Windshield Washer

(Windshield Washer): Press and hold the
LQ
windshield washer paddle with this symbol on
it to wash your windshield. The washers and
wipers will operate.
When you release the paddle, the washers will
stop, and the wipers will continue to operate
for two cycles, unless your wipers had already
been on. In that case, the wipers will resume the
wiper speed you had selected earlier.