Hood Release - Pontiac Montana SV6 2007 Owner's Manual

Hood Release

To open the hood, do the following:
2. Go to the front of the vehicle and push the
underhood release to the right. It is located
near the center of the hood, above the grille.
1. Pull the hood release
handle with this
symbol on it. It is
located under the
instrument panel on
the driver's side.
3. Lift the hood.
4. Pull up on the hood prop to release it from its
storage clip.
The hood prop may be hot due to increased
engine temperatures under the hood, so
be careful when handling it. Use your hood
prop sleeve when handling the hood prop.
5. Put the end of the hood prop into the slot in
the underside of the hood, on the driver's
side of the vehicle. It is marked by an arrow.
Before closing the hood, be sure all the filler
caps are on properly. Lift the hood to relieve
pressure on the hood prop. Remove the hood prop
from the slot in the hood and return the prop to its
retainer. Then let the hood down and close it firmly.
419