Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high or high
beam to low, pull the turn signal lever all the way
toward you. Then release it.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
When the high beams are
on, this light on the
instrument panel cluster
will also be on.
Windshield Wipers
Use this lever located on the right side of the steering
wheel to operate the windshield wipers.
9
OFF: Move the lever to OFF to turn off the
windshield wipers.
3-7