Setting The Clock - Kenmore 790. 9802 series Use & Care Manual

Setting the Clock

Setting the Clock
The pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has
been interrupted, the timer in the display will flash.
Press The display will stop flashing.
.
INSTRUCTIONS
To set the clock (example below for 1:30)
1. Press . "CLO" will appear in the display (Fig. 1).
2. Press
2).
3. Press . The time of day will appear in the display (Fig. 3).
Changing between 12 or 24 hour time of day display
1. Press and hold
in the display.
2. Press to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Fig. 4) or "24h" (Fig.
5).
3. Press to accept the change or press
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
pads to set the time of day to 1:30 (Fig.
for 7 seconds until "12h" or "24h" appears
PRESS
to reject the
15
DISPLAY
UPPER WARM CONV UPPER
ROAST BAKE BROIL TIMER
LOCKED DELAY TIMED REMOVE
Fig. 1
UPPER WARM CONV UPPER
ROAST BAKE BROIL TIMER
LOCKED DELAY TIMED REMOVE
Fig. 2
UPPER WARM CONV UPPER
ROAST BAKE BROIL TIMER
LOCKED DELAY TIMED REMOVE
Fig. 3
UPPER WARM CONV UPPER
ROAST BAKE BROIL TIMER
LOCKED DELAY TIMED REMOVE
or
Fig. 4
UPPER WARM CONV UPPER
ROAST BAKE BROIL TIMER
LOCKED DELAY TIMED REMOVE
Fig. 5
LOWER CONV WARM LOWER
DOOR CLEAN BROIL BAKE ROAST
RACKS TIMED DELAY LOCKED
LOWER CONV WARM LOWER
DOOR CLEAN BROIL BAKE ROAST
RACKS TIMED DELAY LOCKED
LOWER CONV WARM LOWER
DOOR CLEAN BROIL BAKE ROAST
RACKS TIMED DELAY LOCKED
LOWER CONV WARM LOWER
DOOR CLEAN BROIL BAKE ROAST
RACKS TIMED DELAY LOCKED
LOWER CONV WARM LOWER
DOOR CLEAN BROIL BAKE ROAST
RACKS TIMED DELAY LOCKED