Preface; About This Manual; Manual Organization - Supero SUPER SERVER 5013C-MT User Manual

About This Manual

This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 5013C-MT.
Installation and maintainance should be performed by experienced technicians
only.
The SuperServer 5013C-MT is a high-end single processor 1U rackmount server
based on the SC813MT-300C 1U rackmount server chassis and the Super
P4SCT+ motherboard. The P4SCT+ supports a single Intel
sor of up to 3.40 GHz (processors must be 0.13 micron technology) and Intel
®
Celeron processors of up to 2.80 GHz.

Manual Organization

Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the Super P4SCT+ motherboard
and the SC813MT-300C chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
5013C-MT into a rack and check out the server configuration prior to powering up
the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the
functions and information provided by the control panel on the chassis as
well as other LEDs located throughout the system.

Preface

iii
Preface
® ®
Pentium 4 proces-
®