Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6025B-TR+/
6025B-8R+. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 6025B-TR+/6025B-8R+ is a high-end server based on the
SC825TQ-R700LP/SC825S2-R700LP 2U rackmount chassis and the X7DBE+/
X7DB8+, a dual processor serverboard that supports dual Intel
processors at a Front Side (System) Bus speed of 1333 MHz and up to 64 GB of
registered FBD ECC DDR2-667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the X7DBE+/X7DB8+ serverboard and
the SC825TQ-R700LP/SC825S2-R700LP chassis, which comprise the SuperServer
6025B-TR+/6025B-8R+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6025B-
TR+/6025B-8R+ into a rack and check out the server confi guration prior to pow-
ering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
®
TM
Xeon
LGA 771
Advertisement
Table of Contents
