Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 5015M-UR/5015M-
U/5015M-NTR/5015M-NT. Installation and maintenance should be performed by
experienced technicians only.
The SuperServer 5015M-UR/5015M-U/5015M-NTR/5015M-NT is a high-end server
based on the SC815TQ-R450U/SC815TQ-560U 1U rackmount chassis and the
PDSMU, a single processor serverboard that supports Intel
Pentium® D, Pentium Extreme Edition, Pentium 4, and Celeron D processors in an
LGA775 Package at a Front Side (System) Bus speed of 1066/667/533 MHz and
up to 8 GB of unbuffered ECC/non-ECC DDR2-667/533/400 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the PDSMU serverboard and
the SC815TQ-R450U/SC815TQ-560U chassis, which comprise the SuperServer
5015M-UR/5015M-U/5015M-NTR/5015M-NT.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5015M-UR/
5015M-U/5015M-NTR/5015M-NT into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
®
Xeon® 3000 Series,
Advertisement
Table of Contents
