Table of Contents
Advertisement
S
S
UPER
ERVER 5013C-MT User's Manual
IR Connector
The infrared connector is located on
J16. See the table on the right for
pin definitions. See the Technical
Support section of our web page for
information on the infrared devices
you can connect to the system.
Serial Ports
Two serial ports are included on the
motherboard: COM1 is a port lo-
cated beside the mouse/keyboard
ports and COM2 is a header located
on the motherboard near the J20
power connector. See the table on
the right for pin definitions.
Fan Headers
There are six fan headers on the
P4SCT+, which are designated CPU/
Chassis Fan1, Chassis Fan2, Chas-
sis Fan3, Chassis Fan4 and OH
(Overheat)/Chassis Fan5. (Chassis
Fan 3 and Chassis Fan 4 are not
monitored by BIOS.) Connect the
fan on your CPU heatsink to the
CPU/Chassis Fan1 header. See the
table on the right for pin definitions.
Number
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1
2
3
4
DTR
5
Ground
Note: Pin 10 is included on the header but
not on the port.
t i o n .
Fan Header Pin Definitions
(CPU/ Chassis and Overheat)
Pin
Number
1
2
3
Caution: These fan headers are DC power.
5-14
Infrared Pin
Definitions
(J16)
Pin
Definition
1
+5V
2
CIRRX
3
IRRX
4
Ground
5
IRTX
6
NC
Pin Number Definition
CD
6
DSR
RD
7
RTS
TD
8
CTS
9
RI
10
NC
NC indicates no connec-
Definition
Ground (black)
+12V (red)
Tachometer
Advertisement
Table of Contents
