Matrix U7XE-05 Bike Service Manual page 69

CHAPTER 9: PART REPLACEMENT GUIDE
9.19 DRIVE AXLE SET REPLACEMENT - CONTINUED
21) Use a screwdriver to remove the iron plate from the drive axle (Figures S & T).
FIGURE S FIGURE T
22) Rotate the drive axle to make sure that the motion is smooth and that there is no wobbling to one side (Figures U).
FIGURE U
23) Re-install the belts as outlined in Section 9.15.
24) Reverse Steps 1-2 to re-assemble the unit.
25) Test the Bike as outlined in Section 9.20.
66