Start-Up Procedure; Shutdown Procedure - Delta M-1K User Manual

8. Input Breaker :
1) In Online Mode :
When an over current issue occurs, the input breaker on the rear of the
z
z
UPS will automatically activate and the unit will transfer to battery mode.
After the abnormal issue is solved, press this input breaker and the unit will
automatically switch back to online mode (you don't need to press the ON/
OFF button (
If an over current issue occurs, the input breaker on the rear of the UPS
z
z
will automatically activate. If there is no battery power, the UPS will au-
tomatically shutdown. After the abnormal issue is solved, press the input
breaker and the unit will automatically run in online mode (you don't need
to press the ON/OFF button (
2) In Battery Mode :
When an over current issue occurs, the input breaker on the rear of the
z
z
UPS will automatically activate and the unit will still run in battery mode.
After the abnormal issue is solved, press the input breaker and the unit will
automatically switch back to online mode (you don't need to press the ON/
OFF button (

5.3 Start-up Procedure

When the UPS is OFF, press and hold the ON/ OFF button (
you hear one beep to turn on the UPS. If the UPS is first turned on with AC applied,
the unit will perform a 5-second self-test.

5.4 Shutdown Procedure

When the UPS is ON, press and hold the ON/ OFF button (
you hear one beep to turn off the UPS. Though you have turned off the unit, the
UPS continues charging the batteries whenever it is plugged into a wall outlet and
there is acceptable AC voltage present.
Amplon M Series
) to start up the UPS).
) to start up the UPS).
NOTE:
When the input breaker automatically activates, it means
that something wrong with the UPS or its connected loads. It is
highly recommended that you turn off the UPS, remove the input
power cord, and let qualified service personnel carefully inspect the
UPS, its connected loads and the surrounding environments.
) to start up the UPS).
3 0
) and release it when
) and release it when