Remote Control Operation - Superior VRT4032ZEN Installation And Operation Instruction Manual

BASIC CONSTRUCTION
• Touch-Screen LCD and three push buttons will allow input from users.
• LCD screen will provide system status & input feedback to user.
• Backlight will illuminate LCD screen for 5 seconds after any user input – the 1st touch
of the LCD screen will only illuminate the backlight (will not respond to associated zone
function). To activate any command, the backlight for the screen must be on and the
command must be touched before the backlight goes off.
• Powered via four AAA sized batteries (6V nominal) with LOW BATTERY INDICATOR
(5.0V).
Touch-Screen LCD and Button Layout (Not to scale)
SET TEMP Zone
FLAME Zone
CHANNEL UNLOCK Zone
DOWN Button
126867-01A
OPERATION

REMOTE CONTROL OPERATION

ON THERMO OFF
P1
P1
A
Figure 43 - Touch-Screen LCD and Button Layout
www.SuperiorFireplaces.US.com
Continued
Cont.
ROOM
Pilot
°
°
SET
S M T W T F S
PROGRAM
P2
:
AM
P2
PM
MODE/SET
MODE Zone
ROOM TEMP Zone
TIME/PROG Zone
CHANNEL PROG Zone
MODE/SET Button
UP Button
23