Table of Contents
Advertisement
Three Piece
Log Set
Optional
Remote
Control
Control Knobs
Remote Selector
Switch (Optional)
Piezo Igniter
Figure 1 - Log Base Assembly
f i r e - p a r t s . c o m
REMOTE CONTROL ACCESSORIES
There are four optional remote controls that can be purchased sepa-
rately for this fi replace insert:
• wall switch
• wall thermostat
• hand-held ON/OFF remote
• hand-held thermostat remote
See Accessories, Pages 28-29.
127119-01C
PRODUCT IDENTIFICATION
Top Louver Assembly
Firebox
Hood
Firebox Support
Screen Assembly
OPERATION
This vent-free fi replace insert is clean burning. It requires no outside
venting. There is no heat loss out a vent or up a chimney. Heat is
generated by both realistic fl ames and glowing embers. When used
without the blower, the fi replace insert requires no electricity making
it ideal for emergency backup heat.
SAFETY DEVICE
This fi replace insert has a pilot with an Oxygen Depletion Sensing
(ODS) safety shutoff system. The ODS/pilot is a required feature for
vent-free room heaters. The ODS system shuts off the fi replace insert
if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This fi replace insert has a piezo igniter. This system requires no
matches, batteries or other sources to light fi replace insert.
BLOWER ASSEMBLY
This fi replace insert is equipped with a blower assembly. The blower
operates thermostatically and has a variable control. The blower
circulates heated air from the fi replace insert into the room. Use of
blower is optional.
SuperiorFireplaces.us.com
Top Outer Casing
Bottom Louver
Assembly
Blower
Assembly
Figure 2 - Fireplace Insert
PRODUCT FEATURES
Gas Line
Access
5
Advertisement
Table of Contents
