Kontron 886LCD-M/ATX User Manual page 73

KTD-00474-U
Note: List of errors:
<INS> Pressed
Timer Error
Interrupt Controller-1 error
Keyboard/Interface Error
Halt on Invalid Time/Date
NVRAM Bad
Feature
Auto adjust Boot Priority
Removable Devices 1st
Force Boot Device
F11 BBS popup boot menu
Hide Removable Devices
Execute Embedded Firmware
886LCD-M Family
Public User Manual
Primary Master Hard Disk Error
S.M.A.R.T HDD Error
Cache Memory Error
DMA Controller Error
Resource Conflict
Static Resource Conflict
Options
Yes
No
No
Yes
Disabled
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Forth IDE Master
Any Harddrive (above)
Network
Disabled
Enabled
Full Access
No
Yes
Disabled
Enabled
Date: 2010-06-22
PCI I/O conflict
PCI ROM conflict
PCI IRQ conflict
PCI IRQ routing table error
Description
If Yes then eg. USB devices will be placed first in
the boot Device Priority Menu when booting.
Should removable USB devices get first boot
priority when inserted
Does overwrite current boot setting. Device must
be in the boot priority menu though.
If the device fails to boot, the system will not try
other devices.
Disabled: hide F11 BBS post setup message.
Enabled: F11 post unless Force Boot Device.
Full Access: F11 post
Hide Removable Devices in BBS POPUP menu
(F11)
Execute OEM software if embedded into BIOS.
(Default MemTest-86)
Page 73 of 81