Bios Configuration / Setup; Introduction; Main Menu - Kontron 886LCD-M/ATX User Manual

KTD-00474-U

8. BIOS Configuration / Setup

8.1 Introduction

The BIOS Setup is used to view and configure BIOS settings for the 886LCD-M board. The BIOS Setup is
accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the
operating system boot begins. The Menu bar look like this:
Main Advanced
The available keys for the Menu screens are:
Select Menu: <←> or <→>
Select Item: <↑> or <↓>
Select Field: <Tab>
Change Field: <+> or <->
Help: <F1>
Save and Exit: <F10>
Exits the Menu: <Esc>

8.2 Main Menu

Main Advanced
System Overview
AMIBIOS
Version : 08.00.10
Build Date: 11/17/08
ID : 886LCD46
PCB ID : 14
Serial # : 00374708
PCB ID : 63650000
Processor
Type : Intel(R) Pentium(R) M Processor 1600 MHz
Speed : 600MHz
System Memory
Size : 1016MB
Speed : 333MHz
System Time
System Date
V02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Note on "Speed": If the actual processor support Speed Step (Pentium M does) then BIOS will run at
minimum Speed until BIOS is almost booted and then speed switch as selected for the "Intel Speed Tech"
setting. Celeron M do not support Speed Step and therefore the Processor Speed will be fixed and identical
to the clock speed listed for the Processor.
Main Menu Selections
You can make the following selections. Use the sub menus for other selections.
Feature
System Time
System Date
886LCD-M Family
Public User Manual
BIOS SETUP UTILITY
PCIPnP Boot
BIOS SETUP UTILITY
PCIPnP Boot
[10:18:15]
[Wed 26/11/2008]
Options
HH:MM:SS
MM/DD/YYYY
Date: 2010-06-22
Security Chipset
Security Chipset
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system Time.
<-
||
+-
Tab
F1
F10
ESC
Description
Set the system time.
Set the system date.
Page 57 of 81
Power Exit
Power Exit
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit