Ethernet Connector 2/3 (Ether2/3) - Kontron 886LCD-M/ATX User Manual

KTD-00474-U
4.9.2

Ethernet connector 2/3 (ETHER2/3)

The two Ethernet channels in ETHER2/3 are supported by two discrete Ethernet controllers connected to the
onboard PCI bus.
This connector is not supported on the Engineering sample boards.
The pinout of the RJ45's connector are as follows:
Signal
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
Note: The connector has two LEDs which indicates connection and traffic status. The left LED is status for
the ETHER3 (buttom port) and the right LED is for ETHER2. More than one type of connector is approved
for this application. Please notice that it is possible that the shape of the LED might vary depending on actual
type of connector.
886LCD-M Family
Public User Manual
PIN
8 7 6 5
1 2 3 4
Date: 2010-06-22
Type
4 3 2 1
5 6 7 8
Page 41 of 81
Ioh/Iol Note