Adding A Memory Expansion Board; Conditions For Adding Components; Number Of Mounted Memory Expansion Board; Conditions Concerning Combined Use Of Memory Expansion Boards - Cisco C880 M4 Service Manual

SET0400000

4 Adding a Memory Expansion Board

This chapter describes the procedure for adding a memory expansion board.
In this chapter, SB represents a system board.
ANNT)
- If you want to add some DIMMs at the same time, you may need to install DIMMs into SB
onboard slots before adding a memory expansion board.
- See chapter 3 Adding Memory
SET0401000

4.1 Conditions for Adding Components

SET0401010

4.1.1 Number of mounted memory expansion board

The maximum number of mounted units is 2 boards per system board.
SET0401020
4.1.2 Conditions concerning combined use of memory expansion
boards
There are no conditions concerning combined use of memory expansion boards.
SET0401030

4.1.3 Main unit status

See Chapter 3 Adding Memory (SET0300000).
(SET0300000) in order to confirm memory mounting order.
29
CA92344-0577-01