Adding An Internal Hard Disk Drive (Hdd) / Internal Solid State Drive (Ssd); Conditions For Adding Components; Number Of Mounted Internal Hdd / Ssd; Conditions Concerning Combined Use Of Hdd / Ssd - Cisco C880 M4 Service Manual

SET0500000
5 Adding an Internal Hard Disk Drive (HDD) /
Internal Solid State Drive (SSD)
This chapter describes the procedure for adding the internal hard disk drive (HDD) and the internal
solid state drive (SSD) into the disk unit (DU).
In this chapter, HHD and SSD represent the internal hard disk drive and the internal solid state
drive.
SET0501000

5.1 Conditions for Adding Components

SET0501010

5.1.1 Number of mounted internal HDD / SSD

Table 5.1.1 lists the maximum number of HDD / SSD units that can be mounted in the unit.
Mount units
Disk Unit(DU)
SET0501020

5.1.2 Conditions concerning combined use of HDD / SSD

- There are no conditions concerning the combined use of HDD / SSD.
SET0501030

5.1.3 Main unit status

- Table 5.1.3 lists whether an SB addition can be added in each main unit status.
Main unit status
- AC power to the main unit is off
(Cold maintenance (AC power off))
- AC power to the main unit is on
- System Powered Off
(Cold maintenance (standby))
- AC power to the main unit is on
- System Powered On
(Hot maintenance)
Table 5.1.1
Maximum number of mounted units
4
Table 5.1.3
Work possible?
Yes
Yes
No
31
CA92344-0577-01