Procedure For Adding A Cpu Module; Checking The Delivered Items; Mounting The Adding Options - Cisco C880 M4 Service Manual

SET0203000

2.2 Procedure for Adding a CPU Module

SET0203010

2.2.1 Checking the delivered items

(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The target functions can be used with the specifications and version level of units delivered
separately due to delivery considerations.
SET0203020

2.2.2 Mounting the adding options

Use the following steps to mount the added options.
ANNT) Confirm the quantities and installation locations with a system administrator.
(1) Prepare the system board (SB) to which the CPU module will be added.
See Appendix C.2, "System Board (APP0302000)".
(2) Confirm the numbers and mounting locations of the options.
See Appendix C.3, "CPU (APP0303000)".
(3) Remove the dummy CPU, and install the CPU module.
See Appendix C.3, "CPU module (APP0303000)".
(4) See Chapter 1 Adding a System Board for the next instructions (SET0100000).
23
CA92344-0577-01