Installing The 10G Base-Cr Sfp+ Cable; Removing The 10G Base-Cr Sfp+ Cable - Cisco C880 M4 Service Manual
Hide thumbs
Also See for C880 M4:
- Configuration manual (146 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
APP0313030
C.13.3 Installing the 10G BASE-CR SFP+ cable
(1) Installing the SFP+ cable
1. Grasp the module, and work it toward and into the rear of the card. See "Figure C.13.3"
APP0313040
C.13.4 Removing the 10G BASE-CR SFP+ cable
(1) Removing the SFP+ cable
1. While pressing part A, pull out the module. See "Figure C.13.4".
Figure C.13.3
Figure C.13.4
118
CA92344-0577-01
Advertisement
Table of Contents
