Expansion Board Guide; Removing The Expansion Board Guide - HP ProLiant ML310 Maintenance And Service Manual

Removal and Replacement Procedures

Expansion Board Guide

To remove the expansion board guide:
1. Complete the preparation procedures. Refer to "Preparation Procedures" in this chapter.
2. Remove the access panel. Refer to "Access Panel" in this chapter.
3. Remove all expansion boards supported by the board guide.
4. Push in the four locking tabs (1), and then pull the guide back and away from the
chassis (2).
Figure 2-24: Removing the expansion board guide
To replace the expansion board guide, reverse steps 2 through 4.
2-30 HP ProLiant ML310 Server Maintenance and Service Guide