Assigning Functions To Assign Switches - Sony PDW-F800 Operation Manual

Item Setting
SDI OUT 1 Selects the signal output from
SELECT the SDI OUT1 connector.
OFF: Do not output video.
HD-SDI: Output HD-SDI.
SD-SDI: Output SD-SDI
SDI OUT 2 Selects the signal output from
SELECT the SDI OUT2 connector.
OFF: Do not output video.
HD-SDI: Output HD-SDI.
SD-SDI: Output SD-SDI
SDI OUT 2 Selects whether to superimpose
SUPER (ON) or not superimpose (OFF)
text information on the signal
output from the SDI OUT2
connector.
TEST OUT Selects the output signal from
SELECT the TEST OUT connector.
VBS: Output composite video
signal. When you select
VBS, connect to the
VIDEO IN connector of
your monitor.
Y: Output HD-Y signal.
R/G/B: Output HD RGB
signal.
LCD: Output a signal like the
display in the LCD
monitor.
TEST OUT Selects whether to superimpose
SUPER (ON) or not superimpose (OFF)
text information on the signal
output from the TEST OUT
connector.
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Assigning functions to ASSIGN
switches
You can assign the desired function to any of the
ASSIGN switches.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the ASSIGNABLE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 195.
You can assign functions by using the
following items.
Item Description
ASSIGN SW Assigns the function to
<1> ASSIGN 1 (push-type)
switch.
ASSIGN SW Assigns the function to
<2> ASSIGN 2 (slide-type)
switch.
ASSIGN SW Assigns the function to
<3> ASSIGN 3 (push-type)
switch.
ASSIGN SW Assigns the function to
<4> ASSIGN 4 (push-type)
switch.
[F800]
Assigns the function to
ASSIGN 5 (push-type)
ASSIGN SW
switch.
<5>
ASSIGN SW Assigns the function to RET
<RET> button on the lens.
[700]
Assigns the function to
COLOR TEMP. button.
COLOR TEMP
SW
2
Select the desired switch or button, and
press the MENU knob.
A selection screen for the selected switch or
button appears. You can use these screens to
assign one of the following functions.
Functions to be assigned to the ASSIGN 1/
3/4 (push-type) switch, COLOR TEMP.
button (PDW-700), ASSIGN 5 switch
(PDW-F800), or RET button on the lens
Function Description
OFF Assigns no function.
FRONT MIC Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
PICTURE Assigns execution of
CACHE recording in picture cache
mode.
Adjustments and Settings from Menus 211