Video Format; Status Display; System Frequency - Sony PDW-F800 Operation Manual

1 2 3
HD422 50 5 9 . 9 i
1080
P B N D F E X T - L K
6
01 . . . .
23 45 15
7
H M I N S E C
8
W A R N I N G : H U M I D
9
D I S C E
B A T T E
0
LCD monitor
7
9
0
Monochrome LCD
a Resolution
Indicates the resolution of HD output video.
Indication Resolution (horizontal × vertical)
1080 1080 lines (1920 × 1080)
720 720 lines (1280 × 720)
b Video format
Indicates the format of video being currently
played back or recorded.
Indication Format
HD422 50 MPEG HD422
HD420 HQ/SP/ MPEG HD420
a)
LP
IMX 50/40/ MPEG IMX
b)
30
DVCAM
b)
DVCAM
a) LP is playback only.
b) For the PDW-700, when the optional CBKZ-MD01
SD Record and Playback Software is installed.
c System frequency
Indicates the system frequency of video being
currently played back or recorded.
4 5
O V E R
0
2 4 b i t
H O L D
. .
10
20
F R M
30
40
B
d B
1 ST 2 3 4
F
P E A K
Bit rate
50 Mbps
35/25/18 Mbps
50/40/30 Mbps
25 Mbps
If NTSC AREA is selected
Indication Field or frame
rate
59.9i 59.94 fields per
second
59.9P 59.94 frames per
second
29.9P 29.97 frames per
second
a) 23.98 frames per
23.9P
second
a) For the PDW-700, when the optional CBKZ-FC01
23.98P Record and Playback Software is installed.
If PAL AREA is selected
Indication Field or frame
rate
50i 50 fields per
second
50P 50 frames per
second
25P 25 frames per
second
1) Selected by COUNTRY setting on the FORMAT page
of the OPERATION menu (see page 164).
Note
There may be no indication displayed when this unit
cannot identify the system frequency, for example, when
playing back a disc recorded with other equipment.
d Audio format
Indicates the format of audio being currently
played back or recorded.
Indication Quantization bit rate/sampling
frequency
24bit 24 bits/48 kHz
16bit 16 bits/48 kHz
e Audio level indicators
Indicates the audio recording or playback levels
of channels 1 to 4.
f Status display
PB: Appears during playback.
NDF: Appears when non-drop-frame timecode is
selected.
EXT-LK: Appears when the internal timecode
generator is locked to an external signal input
to the TC IN (timecode input) connector.
Locations and Functions of Parts and Controls
1)
Scan mode
Interlace
Progressive
Progressive
Progressive
1)
Scan mode
Interlace
Progressive
Progressive
25