Sony PDW-F800 Operation Manual page 135

Set Start Time Code
TC 2 2 : 3 4 . 5 6 : 1 7
H M I N
Preset TC 00:00:00:00
3
Press the left- or right-arrow button to
select the digit that you want to change.
4
Turn the MENU knob to change the
value of the digit.
5
Repeat steps 3 and 4 as required.
To reset the timecode to 00:00:00:00
Select Reset to Zero in the Thumbnail Menu,
and then press the SET/S.SEL button or the
MENU knob.
To preset the frequently used timecode
Select Save Preset TC in the Thumbnail
Menu, and then press the SET/S.SEL button
or the MENU knob.
The timecode set in steps 3 and 4 is saved as
a preset value.
To recall the preset timecode
Select Recall Preset TC in the Thumbnail
Menu, and then press the SET/S.SEL button
or the MENU knob.
6
Press the SET/S.SEL button or the
MENU knob.
OK is selected.
7
Press the SET/S.SEL button or the
MENU knob again.
8
Save the clip list (see page 135).
To save clip lists
To save under a specified name
See page 118 for more information about thumbnail
screen operations.
1
In the clip list thumbnail screen, display
the Disc Menu.
2
Select Save Clip List as..., and then
press the SET/S.SEL button or the
MENU knob.
S E C F R M
OK
Cancel
A list of clip lists appears.
Disc Menu
Save Clip List
DVD og BI... 08 AUG2007 11:50
E0003 03 AUG2007 17:51
E0004 03 AUG2007 17:51
E0005 03 AUG2007 17:51
E0006 03 AUG2007 17:51
E0007 03 AUG2007 17:51
E0095 18 MAY2006 10:25
E0098 13 JUN2006 13:43
To switch the information displayed for
clip lists
Press the right-arrow button.
With each press, the display changes in the
order: "Name & Date" t "Name & Title"
t "Name & Short Date" t...
To sort clip lists
Select one of the following orders by
selecting Settings > Sort Clip List By... in the
Disc Menu.
Name(A-Z): Sort in ascending order by clip
list name.
Date(Newest First): Sort by date and time of
clip list creation, newest first.
3
Select the desired clip list name, and
then press the SET/S.SEL button or the
MENU knob.
To save under the same name
The following procedure saves the current clip
list under its current name (the name that appears
in the clip list thumbnail screen).
See page 118 for more information about thumbnail
screen operations.
1
In the clip list thumbnail screen, display
the Disc Menu (see page 117).
2
Select Save Clip List, and then press the
SET/S.SEL button or the MENU knob.
The clip list is saved. However, Save Clip
List as... is executed when the name
displayed in the clip list thumbnail screen is
"no name".
Note
If you press the EJECT button before saving a new or
edited clip list, a message appears asking if you want to
discard your changes and continue. Follow the
instructions in the message to continue or cancel the
operation.
Scene Selection (Clip List Editing)
Name & Date/Sorted by Name
Display Select
135