Sony PDW-F800 Operation Manual page 217

USER CODE
Enter the 4-byte alphanumeric strings for user
identification.
The user code is registered with each organization
locally. It is usually not centrally registered.
When the country code is less than 4 bytes, enter
the country code from the beginning of the 4
bytes and enter the space character (20h) in the
remaining strings.
This user code is determined by the organization.
The methods used depend on the organization.
Note
User code cannot be entered when no organization code
has been entered.
TIME ZONE
Set the time difference from UTC.
Notes
• The UTC is calculated based on the local time, using
the time zone. If the time zone is not set, the UTC is not
recorded correctly.
• When you change the time zone, adjust the internal
clock to local time and turn the power of the camcorder
off and then the power on again.
Adjustments and Settings from Menus 217