Sony PDW-F800 Operation Manual page 184

No. Page
13/13 CAM
CONFIG 2
184 Menu List
Item Settings
TEST SAW SAW/REC
SELECT
COLOR BAR ARIB/100%/
SELECT 75%/SMPTE
USER & ALL OFF/ON
ONLY
RM COMMON OFF/ON
MEMORY
RM REC START RM/CAM/
PARA
SHT DISP MODE SEC/DEG
RM F NO CTRL/RET
DISPLAY
FAN CONTROL AUTO/R.MIN/
MIN
FOCUS MAG SW MTRY/ALT
Description
Selects the test signal.
Selects the HD color bar type.
Show only USER menu in the top menu.
Selects whether or not to share settings for when a
remote control unit is connected and when the unit
is used alone.
When an RM remote control unit is connected,
selects which recording start/stop buttons are
enabled.
RM: remote control unit
CAM: camcorder
PARA: both
Selects shutter speed display (seconds or degrees).
Selects the method used to display IRIS F values
on the MSU-900 or another remote control unit.
CTRL: Display on the basis of control value from
the camera (normal display method).
RET: Display on the basis of position information
from the lens (same method as when AUTO
IRIS is enabled).
Specifies the control method for the cooling fan.
(This setting is retained even when the unit is
powered off.)
AUTO: Control the rotation of the cooling fan
automatically.
R.MIN: Rotate the cooling fan at low speed
during recording only (and stop the rotation
when this unit is used in an environment so
cool that temperatures inside the unit do not
rise).
MIN: Rotate the cooling fan at low speed (and
stop the rotation when this unit is used in an
environment so cool that temperatures inside
the unit do not rise).
Note
Regardless of this setting, the cooling fan rotates
at high speed if temperatures inside the unit rise to
a temperature near the alarm level.
Selects the method that activates the FOCUS
MAG function when the function is assigned to an
ASSIGN switch.
MTRY: The function is on as long as the switch is
held down.
ALT: Each press of the switch toggles between on
and off. (The function goes off automatically
five seconds after it is turned on.)