Assigning Functions To Assign Switches - Sony HDW-650 Operation Manual

Item
HD/SD SDI
OUT
HD/SD SDI
SUPER
TEST OUT
SELECT
TEST OUT
SUPER
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Assigning functions to ASSIGN
switches
You can assign the desired function to any of the
ASSIGN 1/2/3/4/5 switches or RET button on the
lens.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the ASSIGNABLE SW page of
the OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 117.
You can assign functions by using the
following items.
136 Adjustments and Settings From Menus
Setting
Selects the signal output from
the HD/SD SDI OUT
connector.
OFF: Do not output video.
HDSDI: Output HDSDI.
SDSDI: Output SDSDI
Selects whether to superimpose
(ON) or not superimpose (OFF)
text information on the signal
output from the HD/SD SDI
OUT connector.
Selects the output signal from
the TEST OUT connector.
VBS: Output composite video
signal. When you select
VBS, connect to the
VIDEO IN connector of
your monitor.
Y: Output HD-Y signal.
R/G/B: Output HD RGB
signal.
Selects whether to superimpose
(ON) or not superimpose (OFF)
text information on the signal
output from the TEST OUT
connector.
Item Description
ASSIGN SW Assigns the function to
<1> ASSIGN 1 (push-type)
switch.
ASSIGN SW Assigns the function to
<2> ASSIGN 2 (slide-type)
switch.
ASSIGN SW Assigns the function to
<3> ASSIGN 3 (push-type)
switch.
ASSIGN SW Assigns the function to
<4> ASSIGN 4 (push-type)
switch.
ASSIGN SW Assigns the function to
<5> ASSIGN 5 (push-type)
switch.
ASSIGN SW Assigns the function to RET
<RET> button on the lens.
2
Select the desired switch or button, and
press the MENU knob.
A selection screen for the selected switch or
button appears. You can use these screens to
assign one of the following functions.
Functions to be assigned to the ASSIGN 1/
3/4/5 (push-type) switch or RET button on
the lens
Function Description
OFF Assigns no function.
FRONT MIC Assigns the function that
MONO/ switches between stereo and
STEREO monaural when a stereo
microphone is connected.
PICTURE Assigns execution of
CACHE recording in picture cache
ON/OFF mode.
SUPER Assigns the function of a
(VFDISP&M switch to select mixing or no
ENU) mixing of superimposed
viewfinder and menu text data
into the video signals output
from the HD/SD SDI OUT or
TEST OUT connector, when
HD/SD SDI SUPER or TEST
OUT SUPER on the
OUTPUT 1 page of the
OPERATION menu are set to
ON.
MARKER Assigns the ON/OFF function
to display all markers.
b) Assigns the function to delete
RE-TAKE
the last recorded take.
a)