Setting The Marker Display - Sony PDW-F800 Operation Manual

Message display Message
condition
When the gain GAIN: n (where n
setting has been = –6dB, –3dB, 0dB,
changed 3dB, 6dB, 9dB,
12dB, 18dB, 24dB,
30dB, 36dB, 42dB)
When the setting of WHITE: n (where n
the WHITE BAL = A CH, B CH,
switch has been PRESET) or ATW:
changed RUN
When the DCC: ON (or OFF) N Y Y
OUTPUT/DCC
switch has been set
to DCC ON or OFF
When the shutter :SHUTTER:
speed and mode 1/100 (or 1/125,
setting has been 1/250, 1/500, 1/
a) 1000, 1/2000, ECS)
changed
When the black or E.g. AWB : OK
white balance has
been adjusted
a) This is also displayed for about 3 seconds when the
SHUTTER selector is set to ON.
Changing the display mode
1
Display the VF DISP 1 page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 195.
2
Select VF DISP MODE, and press the
MENU knob.
3
Select the desired display mode, and
press the MENU knob.

Setting the marker display

Switch the display of the center and safety zone
markers on or off, and select whether the area
indicated by the safety zone marker is 80%, 90%,
92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
Display
mode
setting
1 2 3
N N Y
N N Y
N Y Y
N Y Y
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
1
Display the MARKER 1 or MARKER 2
page of the OPERATION menu, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 195.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
Item Description
MARKER To hide all markers, set to
"OFF".
CENTER To display the center marker,
set to "ON".
CENTER Selects the position of the
MARK center marker.
SAFETY To display the safety zone, set
ZONE to "ON".
SAFETY Selects the safety zone range
AREA (80%, 90%, 92.5% or 95%).
ASPECT To display the aspect marker,
set to "ON".
ASPECT Selects the aspect mode (15:9/
SELECT 14:9/13:9/4:3/1.85/2.35).
ASPECT To make the areas out of the
a) selected aspect marker dimmer,
MASK
set to "ON".
ASPECT To set the mask level, when the
MASK LVL ASPECT MASK is set to
"ON".
100% To display the effective pixel
b) area, set to "ON".
MARKER
a) The ASPECT MASK setting affects the
viewfinder and LCD monitor display. In the
following cases, it also affects the VBS signal.
• When TEST OUT SELECT on the OUTPUT 1
page is set to VBS.
• When both TEST OUT SUPER on the
OUTPUT 1 page and SUPER(MARKER) on
the SUPER IMPOSE page are set to ON.
On the PDW-700, ASPECT MASK is ignored
for displays in the viewfinder when the following
are true.
• TEST OUT SELECT on the OUTPUT 1 page
is set to HD-Y, and a cable is connected to the
TEST OUT connector.
• TEST OUT SELECT on the OUTPUT 1 page
is set to HD-Y, and TEST OUT SAVE on the
POWER SAVE page is set to OFF.
205