File Menu - Sony PDW-F800 Operation Manual

No. Page Item
24/– SHUTTER SHUTTER
SELECT SELECT
ADD
(only when
SHUTTER
SELECT is set to
"DEGREE")
DEL
(only when
SHUTTER
SELECT is set to
"DEGREE")
1 to 6
(only when
SHUTTER
SELECT is set to
"DEGREE")
a) The setting of this item is overridden by the setting of
Other BEFORE END when TYPE DETECTION in
the BATTERY 2 page is set to "OTHER".
b) The setting of this item is overridden by the setting of
Other END when TYPE DETECTION in the
BATTERY 2 page is set to "OTHER".
c) When TYPE DETECTION in the BATTERY 2 page
is set to "AUTO", any batteries other than Sony BP-
series batteries and Anton Bauer intelligent battery
systems are classified as "Others".

FILE menu

No. Page Item
01/01 USER FILE USER FILE LOAD
USER FILE SAVE
F.ID
USER PRESET
Settings Description
SECOND/ Selects the shutter speed display unit.
DEGREE SECOND: Second units
DEGREE: Degree units (shutter opening angle)
See page 69 for more information about degree
unit settings.
360.0 to 180.0 to Registers a shutter degree setting in an empty
4.5 (upper limit number from 1 to 6 (this item is disabled if no
of shutter angle number is empty).
degrees)
– Deletes the setting assigned to a number from 1 to
6 (numbers with no settings assigned cannot be
selected).
Display only Displays the shutter opening angle assigned to
number 1 to 6, and the corresponding speed in
second units, as calculated on the basis of the
selected frame rate.This differs as follows,
depending on the setting of SYSTEM
FREQUENCY.
59.94i, 29.97P: 1: 216.0, 2: 180.0, 3: 90.0, 4:
45.0, 5: 22.5, 6: 11.2
50i, 25P: 1: 180.0, 2: 150.0, 3: 90.0, 4: 45.0, 5:
22.5, 6: 11.2
23.98P: 1: 180.0, 2: 172.8, 3: 144.0, 4: 45.0, 5:
22.5, 6: 11.2
d) Flashes once per second when the battery status is
"BEFORE END", and flashes 4 times per second
when the battery status is "END".
e) A setting for this item is required when AU CH34
AGC MODE in the AUDIO-2 page is set to OFF.
f) A setting for this item is required when the DWR-
S01D Digital Wireless Receiver is installed.
g) SDI OUT 1 SELECT or SDI OUT 2 SELECT in the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
Settings
EXEC
EXEC
Blank/up to 16
characters
EXEC
Description
For details, see "Saving and
Recalling User Files" on page
219.
For details, see "Resetting USER
menu settings to the standard
settings" on page 203.
Menu List 189