Drive Select Lever; Fuel Tank Cap - Joyner JNSZ650UV Owner's Manual

Push button
Speaker push button
Press the button, speaker sound.
Pedal
Clutch pedal
Press the clutch pedal before you shift by moving the drive select lever.
Brake pedal
Press the brake pedal to slow or stop the vehicle.
Accelerator pedal
Press the accelerator pedal down to increase engine speed. Spring pressure returns the
pedal to the rest position when released. Always check that the accelerator pedal
returns normally before starting the engine.
Before starting the engine, check the accelerator pedal to be sure it is operating
smoothly. Make sure the accelerator pedal fully returns to the idle position as soon as
it is released.

Drive select lever

The drive select lever is used to shift your
vehicle into the 1,2,3,4 and reverse positions.

Fuel tank cap

Remove the fuel tank cap by turning
11