Joyner JNSZ650UV Owner's Manual page 42

3. Insert the screwdriver into the hole, turn the drive of oil pump shaft untill parallel to
the crankshaft (See Fig. 48,49)
Figure 48
4. Align the mark 2 on the shaft of distributor to the mark 1 on the aluminum housing
(See Fig. 50)
5. Insert the distributor slowly to the hole (See Fig. 51). Confirm the direction of
distributor is as per the figure (See Fig. 52, 53). Tighten the nut of distributor housing.
Figure 49
Figure 50
Figure 51
41