Operation Instruction; Control Pedal; Park Brake Lever And Shift Selector - Joyner JNSZ1100SVB Owner's Manual

9. OPERATION INSTRUCTION

WARNING-Do not attempts to start or operate the engine until completely familiar with
the location and use of each control necessary to operate this vehicle. Operator must
know how to stop this machine before starting and driving it.

Control pedal

1) Accelerator Pedal: Changes engine rpm and vehicle ground speed. Press down on
the accelerator pedal with your foot to increase speed and let up on the pedal to
decrease speed. (See figure 1)
Each time prior to starting the engine, check the throttle assembly to ensure that
when pedal is pushed all the way forward the assembly is working smoothly and
returns to idle when released. Do not operate if pedal or engine throttles linkage fail
to return to idle. If unable to correct the problem through lubrication, adjustment or
replacement of worn parts, contact your dealer for assistance.
Brake Pedal: Applying pressure to the brake pedal instead of the accelerator pedal
2)
with your foot will slow down and/or stop the vehicle. Riding or resting your foot on the
pedal unnecessary will wear the brakes out prematurely. (See figure 1)
3) Clutch Pedal: Applying pressure to the clutch pedal with your left foot will make
to declutch and let up the pedal to clutch. (See figure 1)
gearbox
Clutch Pedal

Park brake lever and shift selector

4) Park Brake Lever: Sets and releases the park brakes. Do not drive vehicle with park
Brake Pedal
FIGURE 1
Accelerator Pedal