Troubleshooting; Self-Diagnosis - Pinguino PAC AN130ES Instructions For Use Manual

PROBLEM
The air conditioner •
does not come on
•
•
The air conditioner •
works for a short
time only •
•
The air conditioner •
works, but does not
cool the room
•
•
Unpleasant smell in •
the room
The air conditioner •
does not operate
after restarting it
The alarm light
•
(L) comes on

SELF-DIAGNOSIS

The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF THE APPLIANCE DISPLAYS...
"Low Temperature"
...THIS MEANS:
room temperature is too low

Troubleshooting

CAUSE
there is no current
the appliance is not plugged into the electri-
cal receptacle
The safety device of the plug has tripped
the air exhaust hose has a constriction
the air exhaust hose is blocked
there are bends in the air exhaust hose
windows opened
the exhaust hose is detached
air filter clogged
the air filter is clogged
The safety device has tripped
The tray under the appliance is full
IF THE APPLIANCE DISPLAYS...
"High Temperature"
...THIS MEANS:
room temperature is too high
REMEDY
• wait
• plug into the electrical recepta-
cle
• reset the plug safety device, if
problem persists contact our toll
free customer service.
• position the air exhaust hose
correctly
• check there are no obstacles
obstructing air discharge
• eliminate the bends
• close all windows. Only the
window where the appliance
is installed can remain slightly
opened
• connect the exhaust hose
• clean or replace the filter
• clean or replace the filter
• wait for 3 minutes (it's due to a
normal safety check)
• empty the tray (see paragraph
on end-of-season operations
on page 14).
IF THE APPLIANCE DISPLAYS...
"Probe Failure"
...THIS MEANS:
contact Customer Services.
15