Setting The Timer; Models With Remote Control; Description Of The Remote Control - Pinguino PAC AN130ES Instructions For Use Manual

Portable air conditioner

Hide thumbs

Table Of Contents

Table of Contents

How to programme delay OFF

• Delay OFF can be programmed in any operating mode:

air conditioning/dehumidifying/fan.

• Press the timer button (D). The timer on symbol (Q) comes on.

• Use the

(F) or

delay before the appliance goes off.

They increase or decrease the time in steps of an hour.

The appliance can be set to go off within the next 24 hours.

Five seconds after the timer has been set, the operating mode is

displayed and the timer symbol remains on.

At the set time, the air conditioner goes off and remains in stand-

by.

To cancel the timer programme, press the timer button (D)

again. The timer symbol goes off.

PLEASE NOTE: after setting, the operating mode and fan speed

can be modified.

MODELS WITH REMOTE CONTROL

• Point the remote control at the receiver on the air condition-

er. The remote control must be no more than 16.4 ft (5 metres)

away from the appliance (without obstacles between the

remote control and the receiver).

• The remote control must be handled with extreme care. Do

not drop it or expose it to direct sunlight or sources of heat.

• Replace the cover.

PLEASE NOTE: The remote control can be safely stored in the

appropiate compartment 11 (see figure).

DESCRIPTION OF THE REMOTE CONTROL

20) "ON/OFF" button

21) Increase/decrease temperature/programmed operation

22) "MODE" button

23) "TIMER" button

24) °F/°C switching button

25) Fan speed button (MAX/MED/MIN)

Replacing the batteries

•

Remove the cover on the back of the remote control;

•

Insert two new LR03 "AAA" 1.5V batteries, making sure they are in the

correct position (see the instructions inside the battery compartment);

•

Replace the cover.