Method Of Changing Modes - Epson Stylus CX4900 Service Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050

1.9.3 Method of Changing Modes

This printer has the following modes:
Copy mode
Memory card mode
1
Photo mode*
1
Setup mode*
It is possible to enter respective modes by pressing the button with the same name as
each mode. If a memory card is not inserted at power-on, copy mode is selected in
default configuration. Factory settings of each mode are shown below.
Table 1-52. Factory Settings of Each Mode
Item Copy mode
Paper Type Plain paper
Paper Size A4 or Letter
10 x 15/4" x 6"*
Zoom 100%
1
Copy Color* Color
1
Sheet* 1
1
Mode* ---
1
Restoration* ---
Note : Setting items except "sheet" is stored as each mode (except setup mode) setting when
pushed the start button, transit to other mode, or the power off timing. The setting will
not be stored when the printer is pulled out from the outlet. At the timing of transition to
the setup mode, setting items including sheet number are stored.
Note *1: Stylus CX5900/CX6000/DX6000/DX6050 only
*2: The panel indicator only. The printer chalks 10 x 15 format up to 4" x 6" format.
PRODUCT DESCRIPTION
Memory card
Photo mode* 1 Setup mode*
mode
Photo Paper Photo Paper Plain Paper
1
4" x 6"* or 4" x 6" or
A4 or Letter
2 2
10 x 15/4" x 6"*
--- ---
--- ---
1 1
Print select ---
--- Off
1
---
---
---
---
---
Control Panel
Revision A
54