Borderfree Copy - Epson Stylus CX4900 Service Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050

1.4.4.2 BorderFree Copy

The following table shows the relative positioning of the original and copy.
Table 1-24. Original (scanner)
RW OLM
(readable width)
(out-of-range left margin)
216 mm (8.5") 1.5 mm ± 1 mm
Table 1-25. Copy (printer)
Paper size RO
4" x 6" 2.54 mm 2.54 mm
Other 2.54 mm 2.54 mm
Note : Refer to "1.2.1.4 Paper Support" (p.13)
Note *1: Stylus CX5900/CX6000/DX6000/DX6050
*2: Stylus CX4900/CX4905/CX5000/DX5000/DX5050
PRODUCT DESCRIPTION
RL OTM
(readable length)
(out-of-range top margin)
297 mm (11.7") 1.5 mm ± 1 mm
LO TO
1
1.34 mm* / 2.54 mm*
2
2.82 mm* 3.6 mm*
2.96 mm 4.02 mm
for paper width (PW) and paper length (PL).
TO
PW Top
BO
1
/
2
LO
*1
OLM
RW Top
OTM
Note *1: This indicates the top left corner of the original. Normally, this corner is aligned
with the scan bed's top right corner as the reference point.
*2: This indicates the scan start position at the top left of the original, which
corresponds to the print start position at the top left of the copy. The bottom right
corner position of the copy is within the print area but varies according to the
enlarge/reduce setting.
Stand-alone Copy
PL
Right side of copy
Print direction
*2
Scan direction
Right side of original
RL
Figure 1-10. BorderFree Copy
Revision A
BO
Copy
Print area
Copy paper
Original
(face down)
Scan area
Scan bed
27