Relation Between Original And Copy - Epson Stylus CX4900 Service Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050

1.4.4 Relation between Original and Copy

1.4.4.1 Standard Copy
The following table shows the relative positioning of the original and copy.
Table 1-22. Original (scanner)
RW OLM
(readable width) (out-of-range left margin)
216 mm (8.5") 3 mm
Table 1-23. Copy (printer)
RM LM
3 mm (0.12") 3 mm (0.12")
Note : Refer to "1.2.1.4 Paper Support" (p.13)
PRODUCT DESCRIPTION
RL OTM
(readable length) (out-of-range top margin)
297 mm (11.7") 3 mm
TM BM
3 mm (0.12") 3 mm (0.12")
for paper width (PW) and paper length (PL).
Stand-alone Copy
TM
RM
PW Top
LM
*1 *2
OLM
RW Top
Right side of original
OTM
Note *1: This indicates the top left corner of the original. Normally, this corner is aligned
with the scan bed's top right corner as the reference point.
*2: This indicates the scan start position at the top left of the original, which
corresponds to the print start position at the top left of the copy. The bottom right
corner position of the copy is within the print area but varies according to the
enlarge/reduce setting.
Figure 1-9. Standard Copy
Revision A
PL
BM
Right side of copy
Copy
Print area
Copy paper
Print direction
Scan direction
Original
(face down)
Scan area
Scan bed
RL
26