EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050
4.4.8 CR Scale
External view
Chipped Part
Tabs
Extension Spring 3.289
Figure 4-13. Removing Carriage Unit (1)
DISASSEMBLY/ASSEMBLY
Slit of CR Encoder Sensor
Tab
CR Scale
Printer Section
Part/Unit that should be removed before removing CR Scale
Document Cover / Panel Unit / Scanner Unit / Housing, Upper
Removal procedure
Pay attention to the following instructions:
C A U T I O N
Do not touch the CR Scale with bare hands.
Do not damage the CR Scale.
Handle the Extension Spring 3.289 in a way that does not
extend it.
1.
Remove the CR Scale from the Main Frame.
When installing the CR Scale, pay attention to the following
instructions.
•
Pass the CR Scale into the slit of the CR Encoder Sensor.
•
Chipped portion of the CR Scale should be facing upward.
•
Make sure that Extension Spring 3.289 is not twisted, and
hitch one side of Extension Spring 3.289 to the hook of the
Main Frame.
Revision A
135