Epson Stylus CX4900 Service Manual page 61

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050
1.9.4.3 Memory Card Insertion/Ejection
The functions of this unit caused by memory card insertion or ejection are described in
the following table.
Table 1-55. Memory Card Insertion/Ejection
Action
• Recognize the card and light Card Access LED if it is right.
• The LED blinks while memory access occurs to the memory card.
Card Insertion
• The Power LED blinks during the card recognition.
• Return from the low power panel mode.
• Turn off Card Access LED.
Card Ejection
• Stop print job while memory card print is in process and eject paper.
• Clear memory card error if memory card is wrong.
1.9.4.4 Connection/Removal of DSC
Table 1-56. Connection/Removal of DSC
Action
This unit moves to a DSC direct mode after a device is confirmed for DSC direct,
when a device is connected to EXT. I/F (USB Host). It won't move to DSC direct
mode when it shows general printing mode or error. It moves to DSC direct mode
when it finished printing or error status has been resolved. (Errors that is related
Connect
with memory card, index sheet or PG will be automatically canceled and it moves to
the DSC
DSC direct mode. Ink-low status will be also ignored.).
to this unit
"Camera Connected" icon will be displayed with LCD and Change to "Print
with USB
1
Select"* when connection was confirmed, not when it moves to DSC direct mode.
cable
If the DSC direct device was connected to EXT I/F and any error has occurred on
confirmation, it shows DSC direct error.
If this unit was on power save mode and DSC direct device was connected, this unit
will be back to usual status and then it confirms connection.
This unit moves to "Memory card print" mode and select and light "Print Select"*
when condition where device recognition was carried out normally for DSC direct.
Remove
the DSC During the printing from a device for DSC direct, this unit stops a printing and
from this moves to "Memory card print" mode and select and light "Print Select".*
unit
When this unit is displaying "DSC direct error", this unit cancel it error and returns
it in condition of before connection.
Note *1: For Stylus CX4900/CX4905/CX5000/DX5000/DX5050; LED panel will show 'P'
and Change to "Print All/DPFOF"
*2: For Stylus CX4900/CX4905/CX5000/DX5000/DX5050; "Print All/DPFOF"
PRODUCT DESCRIPTION
Function
Function
2
1.9.4.5 Low Power Panel Mode
Without any panel operation for 13*
are in standby status, this unit moves into the low power panel mode in which power
consumption for the panel decreases. This unit recovers from that mode by pushing any
button but Power Button or printing/scanning by the computer. This unit is turned off
by pushing Power Button in that mode.
Table 1-57. Low Power Panel Mode
Action
• Turn off (LCD and *
• Blink Decimal Point LED slowly.*
Transition to
• No move in error status except for memory card error, index sheet error and PG
low power
error.
mode
• Ejecting of memory card or accessing it by PC has no effect on low power
mode.
Recovery • Recall the panel status as that before moving to low power panel mode.
from low
• Inserting or ejecting of memory card or accessing it by PC has no effect on low
power mode
power mode.
Note *1: Stylus CX5900/CX6000/DX6000/DX6050
*2: Stylus CX4900/CX4905/CX5000/DX5000/DX5050
1.9.4.6 Adjust Lever Function
If paper thickness lever is in wrong position, the printer displays "PG position warning".
Table 1-58. Adjust Lever Function
Adjust lever
status
• "H" will be displayed with 7 Segment LED for about 3 seconds just
PG open
after the adjust lever is changed to "H: Envelope" position.*
1
(Displayed "H")*
• "Paper thickness lever was changed" or this image icon will be
2
("H" to "L") *
2
displayed with LCD.*
• "L" will be displayed with 7 Segment 7 Segment LED for about 3
seconds just after the adjust lever is changed to "L: Cut sheet" position.
PG close
• "Paper thickness lever was changed" or this image icon will be
1
(Displayed "L")*
displayed with LCD.*
2
("L" to "H")*
• Clear the PG error and print job suspended by PG error when the adjust
lever is changed to "L: Cut sheet position" in the PG error status.
Note *1: Stylus CX4900/CX4905/CX5000/DX5000/DX5050
*2: Stylus CX5900/CX6000/DX6000/DX6050
Control Panel
1 2
/15* minutes while the printer and scanner unit
Function
1
) all LEDs except for Power LED and Card Access LED.
2
l
Function
2
2
Revision A
1
61