Control Panel Of Stylus Cx5900/Cx6000/Dx6000/Dx6050 - Epson Stylus CX4900 Service Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050
1.9.2 Control Panel of Stylus CX5900/CX6000/DX6000/
DX6050
Buttons
The control panel contains the following buttons, which are used to set and execute
various operations.
All of them are non-lock type buttons.
Table 1-50. Buttons
Button *
Power 1 Execute turning on/off this unit.
Make transition from "Copy mode" or "Photo mode" or "Setup
Memory Card 2
mode to "Memory Card mode" and selects one of card print mode.
Make transition from "Memory Card mode" or "Photo mode" or
Copy 3
"Setup mode" to "Copy mode" and selects zoom function.
Paper Type 4 Select paper type.
Paper Size 5 Select paper size.
Make transition from "Copy mode" or "Memory Card mode" or
Photo 11
"Setup mode" to "Photo mode".
Make transition from "Copy mode" or "Memory Card mode" or
Setup/Utilities 12
"Photo mode" to "Setup mode".
Up/Down 13 Sets number of copies
Left/Right 14 Select print image
Start 15 Start card print or color copy or scan.
Stop job of copying or printing or sometimes work at the printing.
Stop/Clear 16
Clear the setting value at the non-printing.
Note "*": Numbers in the table correspond to the numbers shown in
Figure 1-24 (p53)
Refer to "1.9.4.2 Stand-alone Copy / Memory Card Print / Photo / Setup/Utilities
(Stylus CX5900/CX6000/DX6000/DX6050)" (p.57)
PRODUCT DESCRIPTION
Function
Figure 1-23 (p52)
and
for details about each button.
Control Panel
Indicators
The control panel contains 2.0 inch LCD and 15 LEDs, which are used to indicate
various status.
Table 1-51. Indicators (Stylus CX5900/CX6000/DX6000/DX6050)
LED *
1
Power LED [Green] * A Light at stand-by. Blink while some operation is proceeding.
Light one of them while some memory card print function
Memory Card LED 1-4
showing below is ready or proceeding.
st
1 [Green] Print Select
J
nd
2 [Green] Print All/PictBridge
rd
3 [Green] Print Index Sheet
th
4 [Green] Print From Index Sheet
Light one of them while copy print function shown below is ready
Copy LED 1-2
or proceeding.
K
st
1 [Green] Fit to Page
nd
2 [Green] 100%
Photo [Green] L Light while Photo function showing below is ready or proceeding.
Paper Type LED 1-3 Light one of them showing which paper type below is selected.
st
1 [Green] Plain Paper
M
nd
2 [Green] Photo Paper
rd
3 [Green] Matte Paper
Paper Size LED 1,2 Light one of them showing which paper size below is selected.
st
1 [Green] A4 (Euro/Asia), Letter (EAI), Letter/A4 (Latin)
N
nd
2 [Green] 10x15/ 4"x6" (Euro/Asia), 4"x6" (EAI/Latin)
rd
3 [Green] 13x18/5"x7" (Euro/Asia), 5"x7" (EAI/Latin)
2 inch LCD O Display photo, print number, error, settings, etc.
Card Access LED Light when available memory card is in a slot. Blink when
--
2
[Green] * accessing to the card.
Note "*": Numbers in the table correspond to the numbers shown in
Figure 1-24 (p53)
Note *1: All LEDs except for Power LED will be turned off while printing or scanning by PC.
*2: This LED is located near the card slot, not on the control panel.
Revision A
Function
Figure 1-23 (p52) and
51