Table of Contents
Advertisement
from the sheet guide
* guide mark
Switching Between Continuous Paper and Single Sheets
When using the tractor, you can easily switch between continuous paper and single sheets
(including envelopes or postcards) without removing the continuous paper from the tractor.
Switching to single sheets
Follow these steps to switch from continuous paper to single sheets:
1. When the Auto tear off function is turned on, the printer advances the paper to the tear off
position automatically.
2. Tear off the printed pages.
Caution:
!
❏ Always tear off paper before feeding it backwards; feeding too many sheets backwards
can cause a paper jam.
❏ Never feed labels backward using the Load/Eject button. Labels can easily peel off their
backing and jam the printer. For information on removing labels from the paper path,
see "To tear off and eject labels" on page 42.
3. Press the Load/Eject button to feed the continuous paper back to the standby position. The
paper is still attached to the tractor, but is no longer in the paper path.
4. Set the paper release lever to the single-sheet feeding position. Also set the paper-thickness
lever (located under the printer cover) to the proper position for your paper's thickness. See
"Adjusting the Paper-thickness lever" on page 31 for instructions.
LQ-690II/LQ-690IIN
User's Guide
Paper Handling
45
Advertisement
Table of Contents
