Nexcom NSA 5130 User Manual page 82

Chapter 4: BIOS Setup
Thermal Configuration
This section is used to configure the intelligent power sharing function.
BIOS SETUP UTILITY
Advanced
Thermal Configuration
ME SMBus Thermal Reporting [Enabled]
Thermal Data Reporting [Enabled]
[20]
SMBus Buffer Length
Thermal Reporting EC PEC [Disabled]
PCH Temp Read [Enabled]
Selects Slots with TS on DIMM
Thermal Sensor on DIMM0 [Disabled]
Thermal Sensor on DIMM1 [Disabled]
Thermal Sensor on DIMM2 [Disabled]
Thermal Sensor on DIMM3 [Disabled]
Alert Enable Lock [Disabled]
PCH Alert [Disabled]
DIMM Alert [Disabled]
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
ME SMBus Thermal Reporting
Enables or disables the ME SMBus thermal reporting configuration.
Thermal Data Reporting
Enables or disables the thermal data reporting.
SMBus Buffer Length
Selects the length of SMBus block read message for EC.
Thermal Reporting EC PEC
Enables or disables the Packet Error Checking (PEC) for SMBus block
read.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
PCH Temp Read
Enables or disables the PCH temperature read.
Thermal Sensor on DIMM0 to Thermal Sensor on DIMM3
Enables or disables the thermal sensor.
Enabled/Disabled ME
SMBus Thermal Reporting
Configuration.
Alert Enable Lock
Locks all alert enable settings.
PCH Alert
Enables or disables the PCH alert.
Select Screen
→ ←:
Select Item
DIMM Alert
↑↓:
Enter: Select
+/ -: Enables or disables the DIMM alert.
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
69
NSA 5130 User Manual