Nexcom NSA 5130 User Manual page 53

Chapter 3: System Setup
5. Remove the protective cap from the CPU socket. The cap is used to
protect the CPU socket against dust and harmful particles. Remove the
protective cap only when you are about to install the CPU.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Protective cap
6. Insert the CPU into the socket. The gold triangular mark on the CPU
must align with the corner of the CPU socket shown on the photo.
The CPU's notch will at
the same time fit into the
socket's alignment key.
• Handle the CPU by its edges and avoid touching the pins.
• The CPU will fit in only one orientation and can easily be in-
serted without exerting any force.
40
Gold triangular
mark
Alignment key
Alignment key
NSA 5130 User Manual