Nexcom NSA 5130 User Manual page 77

Chapter 4: BIOS Setup
ACPI Settings
This section is used to configure the ACPI.
BIOS SETUP UTILITY
Advanced
ACPI Settings
Enable ACPI Auto Configuration
Enable Hibernation
ACPI Sleep State
Lock Legacy Resources
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Enable ACPI Auto Configuration
Enables or disables the ACPI auto configuration.
Enable Hibernation
When this function is enabled, the system will enter the hibernate mode
(OS/S4 sleep state). This function is not applicable to some OS.
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Sus-
pend button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Enables or Disables BIOS
ACPI Auto Configuration.
[Disabled]
[Enabled]
[S3 (Suspend to RAM)]
[Disabled]
Select Screen
← →:
Select Item
↑↓:
Enter: Select
+ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Lock Legacy Resources
Enables or disables the lock of legacy resources.
64
NSA 5130 User Manual