Advanced - Virtual Server - D-Link DRO-250i User Manual

Hide thumbs Also See for DRO-250i:

Table of Contents

Configuring DRO-250i

3.4.5

ADVANCED - Virtual Server

Click on Advanced > Virtual Server to get the web page as shown

below:

Virtual Servers allow remote users to access services on LAN such as FTP

for file transfers or STMP and POP3 for e-mail. The user configures

global IP address that the remote client uses, TCP or UDP protocol and

port number. The virtual server redirects these requests from remote

clients to the server running the specified service on LAN by translating

the global IP to the user's Private IP address. Remember that the Global IP

address must be within the range specified on the NAT Settings page, and

that the Private IP address must be within the range specified for LAN.

Interface Name: This is the WAN interface which will be used for the

servers.

Private IP - This is the IP address of the server on LAN that will provide

the service to remote users.

Transport Type - User can select the transport protocol (TCP or UDP)

that the application on the virtual server will use for its connections. The

DRO-250i User Manual

Table of Contents