Table of Contents
Advertisement
Configuring DRO-250i
3.2.6
INTERFACES-BACKUP CONFIG
Click on Interface > Backup Config to get the Backup config web page
as shown below:
This Web Page is used to configure primary and backup relation between
WAN interfaces of router. Following are the descriptions of the fields on
this page:
Backup Mode:
1. Disable - No backup activity will be done for this interface.
2. Auto - If the primary interface goes down, the backup interface
configured for this will be connected automatically. In addition to this, all
features pertaining to the backup interface will be applied automatically.
3. Manual - If primary interface goes down, backup interface won't be
connected automatically. If user connects the backup manually all the
features like NAT, Virtual Server and Static routes pertaining to this
backup interface will be automatically configured.
Backup Interface: This interface will be configured as backup interface
for the primary.
DRO-250i User Manual
46
Advertisement
Table of Contents
