Product Features; Hardware Features - D-Link DRO-250i User Manual

which ideally gives bandwidth up to 2Mbps. ISDN WAN interface can be
a backup interface which gives 128kbps bandwidth

1.2 Product Features

1.2.1

Hardware Features

LAN Port
The Product is equipped with an auto-negotiated 10/100 (Ethernet) RJ-45
interface for connecting the router to the LAN.
Multiple WAN Ports
The Product has 4 WAN ports.
V.35 WAN Interface
V.35 can be connected to 2 Mbps Leased Modem.
ISDN WAN Interface
ISDN S/T Port is connected to either a dial up line or a dedicated leased
line. It also supports bandwidth on Demand (BOD). Following protocols
are only supported within ISDN sub system:
Layer 2 protocol: HDLC
Layer 3 protocol: Trans
Dial on Demand
The dial on demand feature allows the product to automatically place
a call to a remote node via ISDN WAN port whenever there is traffic
coming from any workstation on the LAN to that remote site.
Introduction to DRO-250i
DRO-250i User Manual
5